STMicroelectronics Effektswitch IC, 10 Ben USB strömförsörjning Hög sida STELPD01 DFN10L

Mängdrabatt möjlig

Antal (1 förpackning med 5 enheter)*

64,51 kr

(exkl. moms)

80,64 kr

(inkl. moms)

Add to Basket
välj eller skriv kvantitet
I lager
  • 415 enhet(er) är redo att levereras
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter
Per enhet
Per förpackning*
5 - 512,902 kr64,51 kr
10 - 9512,812 kr64,06 kr
100 - 24512,724 kr63,62 kr
250 - 49512,634 kr63,17 kr
500 +12,522 kr62,61 kr

*vägledande pris

Förpackningsalternativ:
RS-artikelnummer:
240-0607
Tillv. art.nr:
STELPD01PUR
Tillverkare / varumärke:
STMicroelectronics
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla

Varumärke

STMicroelectronics

Produkttyp

Effektswitch IC

Strömbrytartopologi

Hög sida

Strömbrytartyp

USB strömförsörjning

Motstånd vid påslagning RdsOn

50mΩ

Antal utgångar

2

Gränssnittstyp

USB

Fästetyp

Yta

Minsta matningsspänning

4V

Kapseltyp

DFN10L

Maximal matningsspänning

18V

Antal ben

10

Driftström

5A

Minsta arbetsstemperatur

-40°C

Maximal arbetstemperatur

125°C

Standarder/godkännanden

No

Längd

3.15mm

Höjd

1mm

Bredd

3.15 mm

Serie

STELPD01

Fordonsstandard

Nej

The STMicroelectronics Electronic load switch for power line is an integrated electronic power switch for power rail protection applications. It is able to precisely detect and react to overcurrent and overvoltage conditions. When an overload condition occurs, the device goes into an open state, disconnecting the load from the power supply. An external power MOSFET can be driven to manage the power loss protection in case of fault condition. In case of overvoltage on the input, the device regulates the output to a preset 17.5 V value, Under voltage lockout prevents the load from malfunction, keeping the device off if the rail voltage is too low. The STELPD01 features an adjustable turn-on slew-rate, which is useful to keep the in rush current under control during start-up and hot-swap operations.

Wide input voltage range: 4 V to 18 V

17.5 V typical output overvoltage clamp

Absolute maximum voltage of 23.5 V

5 A maximum continuous current

Thermal protection

Input under voltage lockout

Low inrush current during start-up

Integrated 40 mΩ Power FET

Relaterade länkar