Infineon Effektswitch IC 1, 8 Ben Hög sida Hög sida ITS4100S-SJ-N DSO-8

Se alla Effektswitchkretsar

Antal (1 rulle med 2500 enheter)*

17 942,50 kr

(exkl. moms)

22 427,50 kr

(inkl. moms)

Add to Basket
välj eller skriv kvantitet
I lager
  • 2 500 enhet(er) är redo att levereras
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter
Per enhet
Per rulle*
2500 +7,177 kr17 942,50 kr

*vägledande pris

RS-artikelnummer:
229-1861
Tillv. art.nr:
ITS4100SSJNXUMA1
Tillverkare / varumärke:
Infineon
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla

Varumärke

Infineon

Strömbrytartyp

Hög sida

Produkttyp

Effektswitch IC

Strömbrytartopologi

Hög sida

Motstånd vid påslagning RdsOn

70mΩ

Antal utgångar

5

Antal ingångar

1

Effektklassning

1.5W

Fästetyp

Yta

Minsta matningsspänning

5.5V

Kapseltyp

DSO-8

Maximal matningsspänning

40V

Antal ben

8

Minsta arbetsstemperatur

-40°C

Driftström

0.005A

Maximal arbetstemperatur

125°C

Bredd

6 mm

Längd

5mm

Standarder/godkännanden

No

Höjd

1.75mm

Serie

ITS4100S-SJ-N

Fordonsstandard

Nej

MOTIX™ TLE9877QXW40 offers reliable solutions for automotive applications such as pumps and fans


The MOTIX™ TLE9877QXW40 is part of the MOTIX™ TLE987x product family. The MOTIX™ TLE9877QXW40 is a single chip 3-Phase motor driver that integrates the industry standard Arm® Cortex®-M3 core, enabling the implementation of advanced motor control algorithms such as field-oriented control. It includes six fully integrated NFET drivers optimized to drive a 3-Phase motor via six external power NFETs, a charge pump enabling low voltage operation and programmable current along with current slope control for optimized EMC behaviour. Its peripheral set includes a current sensor, a successive approximation ADC synchronized with the capture and compare unit for PWM control and 16-bit timers. A LIN transceiver is also integrated to enable communication to the device along with a number of general purpose I/Os. It includes an on-chip linear voltage regulator to supply external loads.

It is a highly integrated AEC-Q100 Grade 0 automotive qualified device enabling cost and space efficient solutions for mechatronic BLDC motor drive applications that are located under-the-hood such as pumps and fans.

Summary of Features


•Six current programmable Drivers with charge pump for N-Channel MOSFET

•Integrated LIN transceiver compatible with LIN 2.2 and SAEJ2602

•Two Full duplex serial interface (UART) with LIN support

•Two Synchronous serial channel (SSC)

•On-chip OSC and PLL for clock generation

•One high voltage monitoring input with wake up functionality

•High speed Operational amplifier for motor current sensing via shunt

•Measurement unit:

8-bit ADC module with 10 multiplexed inputs

10-bit ADC module with 8 multiplexed inputs, 5 external Analog inputs

On chip temperature and battery voltage measurement unit

•Increased Temperature Shutdown supports operation up to Tjmax = 175 °C

•Independent Programmable window watchdog

•5V/1.5V Internal supplies

•External Supply (VDDEXT): 5V+/-2% @ 20mA

•Power saving modes:

MCU slow-down Mode

Sleep Mode

Stop Mode

Cyclic wake-up Sleep Mode

Features of the Microcontroller:


•32 bit Arm® Cortex®-M3 Core, up to 40 MHz clock frequency

•64 kByte flash memory for code and data

•32 kByte Boot ROM memory in code space (used for boot code and IP storage)

•6 kByte RAM memory

•Harvard architecture

•Thumb®-2 Instruction Set and hardware divide and multiplication unit

•Four 16-Bit timers

•Capture/compare unit for PWM signal generation (CCU6) with 2 x 16-bits timers

General Characteristics:


•Operating supply voltage Vs=5.5 to 28V, maximum rating 40V

• Extended operating range Vs=3.0 to 28V, MCU / Flash fully functional

•ESD performance :

up to 2kV / handling on all pins

4kV @ HV inputs

6kV @ LIN pin

•Overvoltage device clamp (load dump ruggedness) up to 40V

•Wide operating temperature range: Tj:-40°C up to 175°C