FTDI Chip TTL-232R-3V3-AJ TTL to USB Serial Converter Cable for use with Devices With TTL Level Serial Interface, FTDI

Mängdrabatt möjlig

Antal (1 enhet)*

265,21 kr

(exkl. moms)

331,51 kr

(inkl. moms)

Add to Basket
välj eller skriv kvantitet
Tillfälligt slut
  • 200 enhet(er) levereras från den 07 januari 2026
  • Dessutom levereras 300 enhet(er) från den 25 februari 2026
  • Dessutom levereras 500 enhet(er) från den 04 mars 2026
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter
Per enhet
1 - 9265,21 kr
10 - 49252,00 kr
50 +239,34 kr

*vägledande pris

RS-artikelnummer:
687-7783
Distrelec artikelnummer:
304-00-917
Tillv. art.nr:
TTL-232R-3V3-AJ
Tillverkare / varumärke:
FTDI Chip
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla

Brand

FTDI Chip

Accessory Type

TTL to USB Serial Converter Cable

Product Type

Cable

For Use With

Devices With TTL Level Serial Interface, FTDI VDRIVE2 Or VMUSIC2 Modules

Standards/Approvals

RoHS, USB 2.0, CE, FCC

Distrelec Product Id

30400917

FTDI Chip USB To UART Cable


The FTDI chip USB to UART cable is a fast and simple way to connect devices with a TTL level serial interface to USB. It is available with TTL logic level of 3.3V. Each cable contains a small internal electronic circuit board, utilising the FT232R, encapsulated into the USB connector at the end of the cable. The cable has a gauge of 24AWG and diameter of 5mm. They are terminated by a standard 3.5mm Audio Jack (AJ) connector. The circuit is powered from the USB using 5V power pins and any Vcc connection, always at 5VDC. These cables are supported with Microsoft WHQL certified VCP drivers for Windows, Apple Mac, and Linux.

Features and Benefits


Connect directly to a microcontroller UART or I/O pins

Data transfer rate is up to 3Mbps

Has 35mm audio jack

Low USB bandwidth consumption

Operating temperature ranges between -40°C and 85°C

Provides a USB to TTL Serial interface with various end connectors

Powered from USB connector

Two core and spiral cable with length of 1.8m

UHCI/OHCI/EHCI host controller compatible

Unique serial number attached, used for security purposes while transferring files via cable

USB 2.0 full speed compatible

Various UART-end connector options available

Applications


Communication

Embedded system

Certifications


CE

FCC approved

relaterade länkar