Jumo Datainsamlingsmottagare Mottagare för Data Acquisition

Se alla Tillbehör för datainsamling

Antal (1 enhet)*

6 016,40 kr

(exkl. moms)

7 520,50 kr

(inkl. moms)

Add to Basket
välj eller skriv kvantitet
Lagerinformation är för närvarande otillgänglig - kom tillbaka senare
Enheter
Per enhet
1 +6 016,40 kr

*vägledande pris

RS-artikelnummer:
279-842
Tillv. art.nr:
902931/30-8-10-25/000
Tillverkare / varumärke:
Jumo
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla

Varumärke

Jumo

Produkttyp

Datainsamlingsmottagare

Typ av tillbehör

Mottagare

För användning med

Data Acquisition

Standarder/godkännanden

IC, FCC, cULus, DIN EN 60715

The Jumo The Jumo Radio receiver is used in conjunction with compatible transmitters for mobile or stationary measurement of physical quantities. By utilizing advanced wireless technology operating at the industrial radio frequency of 868.4 MHz, installation effort is significantly reduced. Cable connections are unnecessary, as the radio-based sensor technology also functions reliably in harsh industrial environments. The included Lambda/4 antenna with a 50-ohm impedance can be directly screwed on or mounted externally. When using the optional antenna wall bracket with a 3-meter antenna cable, the free-field range is 300 meters. The measured values received from the transmitter are processed, displayed, and made available as linear current or voltage signals (0(4) to 20 mA, 0 to 10 V) and via the digital RS485 interface.

A front-facing connector for a PC interface with TTL/RS232 or USB/TTL converter is provided for connecting the receiver to a PC

The receiver, housed in a DIN rail enclosure, is designed for mounting on a 35 x 7.5 mm DIN rail according to DIN EN 60715

The screw terminals for electrical connections are arranged on different levels, with a maximum wire cross-section of 2.5 mm²

The device is powered by an AC/DC 20 to 30 V, 48 to 63 Hz supply

Operation and configuration can be performed via the keyboard in conjunction with a two-line LCD display or more conveniently through a setup program Parameters such as filter constants, offset, alarms, and min/max value tracking can be set separately for each channel

Relaterade länkar