Senaste sökningar

    Phoenix Contact SUBCON-PLUS-CAN 9 Way Cable Mount D-sub Connector Socket

    RS-artikelnummer:
    648-3495
    Tillv. art.nr:
    2744694
    Tillverkare / varumärke:
    Phoenix Contact
    Phoenix Contact
    Se alla D Sub Connectors
    94 I lager för leverans inom 1 arbetsdagar
    Add to Basket
    Enheter

    Lagt till varukorgen

    Pris (ex. moms) Each

    437,41 kr

    (exkl. moms)

    546,76 kr

    (inkl. moms)

    EnheterPer unit
    1 - 24437,41 kr
    25 - 74401,82 kr
    75 - 199389,88 kr
    200 - 399370,36 kr
    400 +351,91 kr
    RS-artikelnummer:
    648-3495
    Tillv. art.nr:
    2744694
    Tillverkare / varumärke:
    Phoenix Contact
    COO (Country of Origin):
    DE

    Lagstiftning och ursprungsland

    COO (Country of Origin):
    DE

    Produktdetaljer

    Phoenix Contact SUBCON-PLUS-CAN D-Sub Connectors


    SUBCON-PLUS-CAN 9 pin D-sub socket connectors designed for use in CAN systems up to 1 MBit/s (CAN, CANopen, SafetyBus-P) allowing fast connection of incoming and outgoing bus cables under field conditions. These SUBCON-PLUS-CAN d-sub connectors have a 120 Ohm integrated terminating resistor which can be activated externally by a slide switch, segment by segment startup, a shielded ABS housing, screw connections and can all be used with bus cables as per the CiA Draft Recommendation 303-1 with an outside diameter of 8mm.
    Stock numbers 801-9119, and 648-3518 have two 35° angled cable entries and an internal connection unit which can be turned around enabling cable insertion from the left or the right. Stock number 648-3518 has a second d-sub connection for connecting a programming device. These all accept a cable cross section of 7.6mm to 8.4mm.
    Stock number 648-3495 has a 35° angled cable entry and can accept a variable cable diameter range of 6 to 10mm.
    Stock number 648-3502 has a 180° axial cable entry and two cable entries
    For suitable screwdriver see stock number 390-9663


    SUBCON-PLUS-CAN – 2744694


    A straight D-SUB connector from Phoenix Contact. The 9 way connector is part of the SUBCON-PLUS series and has a termination resistor that can be connected/ switched on through the slide switch. This female, D-SUB connection is suitable for wire size 18 – 26 AWG.


    Features and Benefits


    • Female, screw terminal
    • Metal plated ABS housing
    • Cable mounting type
    • Operating temperature of -20°C to +75°C



    BUS connectors


    Rewireable bus interface connectors suitable for Bitbus, CAN-Bus, Interbus-S (Fieldbus) and Profibus systems. Compact and high quality, the 9-pole sub-D housings are available in bus node or bus termination versions and are colour-coded for easy identification. Service nodes are also available for CAN-Bus and Profibus systems, allowing online programming and repair. Each interface comes with detailed assembly instructions and mounting accessories.


    Available in versions with horizontal or vertical cable outlets
    Fast and reliable connection via screw terminals on the PCB
    Bus terminations include SMT termination resistors
    Colour-coded bodies aid installation and repair
    Safe ESD protection thanks to fully insulated housings
    Supplied with reliable crimp strain relief


    Specifikationer

    AttributeValue
    Number of Contacts9
    GenderFemale
    Body OrientationStraight
    Mounting TypeCable Mount
    Termination MethodScrew Terminal
    Current Rating100.0mA
    Housing MaterialMetal Plated ABS
    Voltage Rating50.0 V
    Length60.0mm
    Width44.0mm
    Depth16.0mm
    SeriesSUBCON-PLUS-CAN
    Dimensions60 x 44 x 16mm
    Minimum Operating Temperature-20.0°C
    Maximum Operating Temperature+75°C
    94 I lager för leverans inom 1 arbetsdagar
    Add to Basket
    Enheter

    Lagt till varukorgen

    Pris (ex. moms) Each

    437,41 kr

    (exkl. moms)

    546,76 kr

    (inkl. moms)

    EnheterPer unit
    1 - 24437,41 kr
    25 - 74401,82 kr
    75 - 199389,88 kr
    200 - 399370,36 kr
    400 +351,91 kr