Knipex Knipex Front Cutter
- RS-artikelnummer:
- 187-8270
- Tillv. art.nr:
- 64 12 115
- Tillverkare / varumärke:
- Knipex
Antal (1 enhet)*
664,82 kr
(exkl. moms)
831,02 kr
(inkl. moms)
GRATIS leverans för online beställningar över 500,00 kr
I lager
- 31 enhet(er) är redo att levereras
- Plus 20 enhet(er) är redo att levereras från en annan plats
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter | Per enhet |
|---|---|
| 1 + | 664,82 kr |
*vägledande pris
- RS-artikelnummer:
- 187-8270
- Tillv. art.nr:
- 64 12 115
- Tillverkare / varumärke:
- Knipex
Specifikationer
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla | Attribut | Värde |
|---|---|---|
| Brand | Knipex | |
| Model Number | Knipex | |
| Cutter Type | Front Cutter | |
| Materials Cut | Copper Wire, Soft Wire | |
| Non Sparking | No | |
| Overall Length | 115 mm | |
| Jaw Length | 6mm | |
| VDE/1000V Approved | No | |
| Height Safe | No | |
| ESD Safe | No | |
| Material | Special Quality Tool Steel | |
| Maximum Cutting Capacity | 1.4mm | |
| Cutting Capacity Medium Hard Wire | 0.8mm | |
| Cut Type | Without Bevel | |
| Cutting Capacity Soft Steel Wire | 0.8mm | |
| Cutting Capacity Soft Wire | 1.4mm | |
| Cutting Capacity Stranded Wire | 0.8mm | |
| Cutting Capacity Copper Wire | 1.4mm | |
| Välj alla | ||
|---|---|---|
Brand Knipex | ||
Model Number Knipex | ||
Cutter Type Front Cutter | ||
Materials Cut Copper Wire, Soft Wire | ||
Non Sparking No | ||
Overall Length 115 mm | ||
Jaw Length 6mm | ||
VDE/1000V Approved No | ||
Height Safe No | ||
ESD Safe No | ||
Material Special Quality Tool Steel | ||
Maximum Cutting Capacity 1.4mm | ||
Cutting Capacity Medium Hard Wire 0.8mm | ||
Cut Type Without Bevel | ||
Cutting Capacity Soft Steel Wire 0.8mm | ||
Cutting Capacity Soft Wire 1.4mm | ||
Cutting Capacity Stranded Wire 0.8mm | ||
Cutting Capacity Copper Wire 1.4mm | ||
RoHS-status: Undantagen
- COO (Country of Origin):
- DE
Electronic front cutter without bevel 115mm
Features / Benefits :
Precision interlocking hinge
Low-friction double spring for smooth and even opening of the clamp
Polishing or mirror polishing (only finish 2) in combination with the thin oil layer provides good protection against rust, thus avoiding disturbances in electronic circuits caused by flaking chrome particles
Induction hardened cutting edges, hardness at least 56 HRC
Front cutting pliers, with small bevel
Low-friction double spring for smooth and even opening of the clamp
Polishing or mirror polishing (only finish 2) in combination with the thin oil layer provides good protection against rust, thus avoiding disturbances in electronic circuits caused by flaking chrome particles
Induction hardened cutting edges, hardness at least 56 HRC
Front cutting pliers, with small bevel
Special quality tool steel, forged, oil-hardened.