Knipex Knipex Front Cutter
- RS-artikelnummer:
- 187-8309
- Distrelec artikelnummer:
- 180-53-286
- Tillv. art.nr:
- 64 42 115
- Tillverkare / varumärke:
- Knipex
Antal (1 enhet)*
710,27 kr
(exkl. moms)
887,84 kr
(inkl. moms)
GRATIS leverans för online beställningar över 500,00 kr
I lager
- 7 enhet(er) är redo att levereras från en annan plats
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter | Per enhet |
|---|---|
| 1 + | 710,27 kr |
*vägledande pris
- RS-artikelnummer:
- 187-8309
- Distrelec artikelnummer:
- 180-53-286
- Tillv. art.nr:
- 64 42 115
- Tillverkare / varumärke:
- Knipex
Specifikationer
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla | Attribut | Värde |
|---|---|---|
| Brand | Knipex | |
| Model Number | Knipex | |
| Cutter Type | Front Cutter | |
| Materials Cut | Copper Wire, Soft Wire | |
| Non Sparking | No | |
| Overall Length | 115 mm | |
| Jaw Length | 10mm | |
| VDE/1000V Approved | No | |
| Height Safe | No | |
| ESD Safe | No | |
| Material | Special Quality Tool Steel | |
| Maximum Cutting Capacity | 1.5mm | |
| Cutting Capacity Stranded Wire | 1mm | |
| Cutting Capacity Hard Wire | 0.5mm | |
| Cutting Capacity Medium Hard Wire | 1mm | |
| Cutting Capacity Soft Wire | 1.5mm | |
| Cutting Capacity Soft Steel Wire | 1mm | |
| Cutting Capacity Copper Wire | 1.5mm | |
| Cut Type | Small Bevel | |
| Välj alla | ||
|---|---|---|
Brand Knipex | ||
Model Number Knipex | ||
Cutter Type Front Cutter | ||
Materials Cut Copper Wire, Soft Wire | ||
Non Sparking No | ||
Overall Length 115 mm | ||
Jaw Length 10mm | ||
VDE/1000V Approved No | ||
Height Safe No | ||
ESD Safe No | ||
Material Special Quality Tool Steel | ||
Maximum Cutting Capacity 1.5mm | ||
Cutting Capacity Stranded Wire 1mm | ||
Cutting Capacity Hard Wire 0.5mm | ||
Cutting Capacity Medium Hard Wire 1mm | ||
Cutting Capacity Soft Wire 1.5mm | ||
Cutting Capacity Soft Steel Wire 1mm | ||
Cutting Capacity Copper Wire 1.5mm | ||
Cut Type Small Bevel | ||
RoHS-status: Undantagen
- COO (Country of Origin):
- DE
Electronic front cutting pliers small bevel 115mm
Features / Benefits :
27° bend
Precision interlocking hinge
Low-friction double spring for smooth, even opening of the clamp - The polishing or mirror polishing (finish 2 only) in combination with the thin layer of oil provides good protection against rust
The mirror polish (only finish 2), in combination with the thin oil layer, offers good protection against rust, thus avoiding disturbances in electronic circuits caused by flaking chrome particles
Induction hardened cutting edges, hardness at least 56 HRC
Precision interlocking hinge
Low-friction double spring for smooth, even opening of the clamp - The polishing or mirror polishing (finish 2 only) in combination with the thin layer of oil provides good protection against rust
The mirror polish (only finish 2), in combination with the thin oil layer, offers good protection against rust, thus avoiding disturbances in electronic circuits caused by flaking chrome particles
Induction hardened cutting edges, hardness at least 56 HRC
Special quality tool steel, forged, oil-hardened.