Microchip PAC1952T-2E/4MX, Current Monitor 16-Pin, VQFN

Se alla Current Sensor ICs

Antal (1 rulle med 3300 enheter)*

39 959,70 kr

(exkl. moms)

49 948,80 kr

(inkl. moms)

Add to Basket
välj eller skriv kvantitet
Tillfälligt slut
  • Leverans från den 23 januari 2026
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter
Per enhet
Per rulle*
3300 +12,109 kr39 959,70 kr

*vägledande pris

RS-artikelnummer:
234-3752
Tillv. art.nr:
PAC1952T-2E/4MX
Tillverkare / varumärke:
Microchip
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla

Brand

Microchip

Product Type

Current Monitor

Offset Voltage

100 μV

Quiescent Current

5μA

Package Type

VQFN

Pin Count

16

Mount Type

Surface

Minimum Supply Voltage

2.7V

Maximum Supply Voltage

5.5V

Minimum Operating Temperature

-40°C

Maximum Operating Temperature

150°C

Standards/Approvals

No

Length

3mm

Series

PAC1952

Width

3 mm

Automotive Standard

No

The Microchip Technology PAC1952T-1E/J6CX is a four-channel, 16 pin energy monitor with bus voltage monitor and current sense amplifier that feed high-resolution ADCs. It has a digital circuitry that performs power calculations and energy accumulation. This enables energy monitoring with integration periods up to one year or longer. The bus voltage, sense resistor voltage and accumulated proportional power are stored in registers for retrieval by the system host or embedded controller. This device has a set of digital comparators that allow the user to detect over/under voltage, over/undercurrent and overpower against user programmed limits for each channel and generates an ALERT when the threshold is exceeded. It is used in applications such as embedded computing, networking, Low voltage/high-power - AI, GPU, Linux® applications, notebook and tablet computing, cloud, Linux & server computing and optical networking modules.

100 mV full-scale range (FSR) for current sense voltage

16-bit resolution for voltage and current measurement

External sense resistor sets the full-scale current range

Very low input current simplifies routing

Voltage monitor with Wide VBUS Range

0V to 32V FSR

16V programmable VBUS option

VSOURCE can be applied before VDD is applied

1% power measurement accuracy over a wide dynamic range

On-chip accumulation of 30-bit power results for energy measurement

5120 SPS for a single channel in burst mode

2.7V to 5.5V supply operation

High-speed mode (3.4 Mbps)

Two independent ALERT/GPIO pins

Uses real-time calibration to minimize the offset error

No input filters are required for this device

relaterade länkar