Texas Instruments Bidirectional Current Monitor Single 10-Pin VSSOP
- RS-artikelnummer:
- 817-6584P
- Tillv. art.nr:
- INA220AIDGST
- Tillverkare / varumärke:
- Texas Instruments
Antal 5 enheter (levereras på en kontinuerlig remsa)*
112,36 kr
(exkl. moms)
140,45 kr
(inkl. moms)
Lagerinformation är för närvarande otillgänglig
Enheter | Per enhet |
|---|---|
| 5 + | 22,472 kr |
*vägledande pris
- RS-artikelnummer:
- 817-6584P
- Tillv. art.nr:
- INA220AIDGST
- Tillverkare / varumärke:
- Texas Instruments
Specifikationer
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla | Attribut | Värde |
|---|---|---|
| Brand | Texas Instruments | |
| Power Supply Type | Single | |
| Product Type | Current Monitor | |
| Minimum Supply Voltage | 3V | |
| Maximum Supply Voltage | 5.5V | |
| CMRR - Common Mode Rejection Ratio | 100dB | |
| Number of Channels | 1 | |
| Supply Current | 1mA | |
| Mount Type | Surface | |
| Package Type | VSSOP | |
| Pin Count | 10 | |
| Minimum Operating Temperature | -40°C | |
| Series | INA220 | |
| Standards/Approvals | No | |
| Height | 0.95mm | |
| Length | 3.1mm | |
| Width | 3.1 mm | |
| Output Type | Bidirectional | |
| Automotive Standard | AEC-Q100 | |
| Maximum Operating Temperature | 125°C | |
| Välj alla | ||
|---|---|---|
Brand Texas Instruments | ||
Power Supply Type Single | ||
Product Type Current Monitor | ||
Minimum Supply Voltage 3V | ||
Maximum Supply Voltage 5.5V | ||
CMRR - Common Mode Rejection Ratio 100dB | ||
Number of Channels 1 | ||
Supply Current 1mA | ||
Mount Type Surface | ||
Package Type VSSOP | ||
Pin Count 10 | ||
Minimum Operating Temperature -40°C | ||
Series INA220 | ||
Standards/Approvals No | ||
Height 0.95mm | ||
Length 3.1mm | ||
Width 3.1 mm | ||
Output Type Bidirectional | ||
Automotive Standard AEC-Q100 | ||
Maximum Operating Temperature 125°C | ||
Current Sense Power / Current Monitors, Texas Instruments
Current and power measurement for real-time system protection, feedback control and high-accuracy system monitoring.
Current Sensing Amplifiers have a voltage output that is proportional to the volt drop across a very low Value resistor, usually in a high-current power rail. Hence they measure the current flowing in that power rail.