Senaste sökningar

    JST WC Hand Ratcheting Crimping Tool

    RS-artikelnummer:
    688-0899
    Tillv. art.nr:
    WC-160
    Tillverkare / varumärke:
    JST
    JST
    Se alla Crimp Tools
    34 I lager för avsändande samma dag
    Add to Basket
    Enheter

    Lagt till varukorgen

    Pris (ex. moms) Each

    5 858,69 kr

    (exkl. moms)

    7 323,36 kr

    (inkl. moms)

    EnheterPer unit
    1 +5 858,69 kr
    RS-artikelnummer:
    688-0899
    Tillv. art.nr:
    WC-160
    Tillverkare / varumärke:
    JST
    COO (Country of Origin):
    DE

    Lagstiftning och ursprungsland

    COO (Country of Origin):
    DE

    Produktdetaljer

    JST WC-160 Hand Crimping Tool for SVH Crimp Terminals


    Importance of a High-Quality Crimp


    When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between conductor and terminal. The other is the insulation crimp which provides strain relief against vibration and tension. It is important that the electrical connection is gas tight without any voids between the wire strands and the terminal. If there any voids present, then corrosion can occur causing resistance and excessive heat which damages the electrical connection. Using a good quality crimping tool will ensure that a full, gas tight crimp is produced preventing future deterioration of the electrical connection and insulation breakage

    WC-160 JST Hand Crimping Tool - Overview


    From JST a durable, reliable and easy to use hand operated crimping tool made from high quality materials. This crimp tool consists of two ergonomically designed handles with a soft grip for comfortable use, a ratchet mechanism, precision ground die assembly, locator and wire stop. The die assembly has three cavities for wire sizes 18 AWG, 20 AWG and 22 AWG. The pre-set load of the tool can be easily adjusted.

    Ratchet Mechanism


    The ratchet is pre-set to a specific force and remains locked until the handles of the tool are fully closed and the dies are bottomed. The handles cannot be opened until a full crimping cycle is achieved therefore preventing partial crimps. Once the cycle is complete the handles will re-open. The ratchet also enables the operator to repeatedly produce consistent, high-quality crimps. If jamming or terminal misplacement occurs the handles can be easily opened by pushing a ratchet release lever

    Locator and Wire Stop


    This hand crimp tool features a user friendly flap style locator which ensures the terminal is accurately positioned during the crimping process. The locator is simply flipped open allowing the terminal to be inserted into the correct profile. Once the terminal is inserted the locator is flipped back into place and the crimp tool is closed until the first ratchet. The pre-stripped wire is then inserted into the terminal until it butts against the wire stop, the hand tool can then be closed until the ratchet releases. The locator is opened and the full crimped terminal can then be carefully removed

    Key Features and Benefits


    • Durable and easy to use
    • Precision ground dies
    • Ratchet mechanism ensures full crimp cycle is achieved
    • Ratchet release latch
    • Locator and wire stop for accurate terminal positioning
    • Easy re-adjustment of load
    • Ergonomically designed soft grip handles for comfortable use

    Questions and Answers


    What Terminals can this Crimping Tool be used with?
    This hand crimping tool is designed for crimping JST loose piece SVH-21T-P1.1 un-insulated crimp terminals that accept a wire size range from 22 AWG to 18 AWG onto cable


    JST Hand Crimping Tools

    Specifikationer

    AttributeValue
    SeriesWC
    Crimp Tool TypeCrimping Tool
    OperationHand
    RatchetingYes
    Overall Length193 mm
    34 I lager för avsändande samma dag
    Add to Basket
    Enheter

    Lagt till varukorgen

    Pris (ex. moms) Each

    5 858,69 kr

    (exkl. moms)

    7 323,36 kr

    (inkl. moms)

    EnheterPer unit
    1 +5 858,69 kr