Toshiba 74VHC595FT Skiftregister 5.5V

Antal 50 enheter (levereras på en kontinuerlig remsa)*

154,85 kr

(exkl. moms)

193,55 kr

(inkl. moms)

Add to Basket
välj eller skriv kvantitet
I lager
  • 6 550 enhet(er) är redo att levereras
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter
Per enhet
50 +3,097 kr

*vägledande pris

Förpackningsalternativ:
RS-artikelnummer:
171-3445P
Tillv. art.nr:
74VHC595FT
Tillverkare / varumärke:
Toshiba
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla

Varumärke

Toshiba

Produkttyp

Skiftregister

Rotationsriktning

Enkelriktad

Fästetyp

Ytmontering

Maximal matningsspänning

5.5V

Minsta arbetsstemperatur

-40°C

Maximal arbetstemperatur

125°C

Djup

1mm

Vikt

0.054g

Standarder/godkännanden

RoHS

Serie

74VHC595FT

The 74VHC595FT is an advanced high speed 8-BIT SHIFT REGISTER/LATCH fabricated with silicon gate C2MOS technology. It achieves the high speed operation similar to equivalent Bipolar Schottky TTL while maintaining the CMOS low power dissipation. The 74VHC595FT contains an 8-bit static shift register which feeds an 8-bit storage register. Shift operation is accomplished on the positive going transition of the SCK input. The output register is loaded with the contents of the shift register on the positive going transition of the RCK input. Since RCK and SCK signal are independent, parallel outputs can be held stable during the shift operation. And, since the parallel outputs are 3-state, it can be directly connected to 8-bit bus. This register can be used in serial- to-parallel conversion, data receivers, etc. An input protection circuit ensures that 0 to 5.5 V can be applied to the input pins without regard to the supply voltage. This device can be used to interface 5 V to 3 V systems and two supply systems such as battery back up. This circuit prevents device destruction due to mismatched supply and input voltages.

Wide operating temperature range: Topr = -40 to 125 

High speed: fMAX = 185 MHz (typ.) at VCC = 5.0 V

Low power dissipation: ICC = 4.0 μA (max) at Ta = 25

High noise immunity: VNIH = VNIL = 28 % VCC (min)

Power-down protection is provided on all inputs.

Balanced propagation delays: tPLH ≈ tPHL

Wide operating voltage range: VCC(opr) = 2.0 V to 5.5 V

Low noise: VOLP = 1.0 V (max)

Pin and function compatible with the 74 series (74AC/HC/AHC/LV etc.) 595 type