ITT Cannon Male Crimp Circular Connector Contact, Wire Size 20 → 16 AWG
- RS-artikelnummer:
- 273-5348
- Tillv. art.nr:
- T2P16MC4LT / 192900-0002
- Tillverkare / varumärke:
- ITT Cannon
Mängdrabatt möjlig
Antal (1 förpackning med 10 enheter)*
82,21 kr
(exkl. moms)
102,76 kr
(inkl. moms)
Lagerinformation är för närvarande otillgänglig
Enheter | Per enhet | Per förpackning* |
|---|---|---|
| 10 - 10 | 8,221 kr | 82,21 kr |
| 20 - 50 | 7,974 kr | 79,74 kr |
| 60 + | 7,661 kr | 76,61 kr |
*vägledande pris
- RS-artikelnummer:
- 273-5348
- Tillv. art.nr:
- T2P16MC4LT / 192900-0002
- Tillverkare / varumärke:
- ITT Cannon
Specifikationer
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla | Attribut | Värde |
|---|---|---|
| Brand | ITT Cannon | |
| Gender | Male | |
| Wire Size | 20 → 16 AWG | |
| Termination Method | Crimp | |
| Series | T2P | |
| For Use With | Trident & APD 6/7 Way Connectors | |
| Current Rating | 13A | |
| Contact Type | Signal | |
| Length | 27.69mm | |
| Contact Plating | Tin | |
| Voltage Rating | 30 V | |
| Contact Material | Copper Alloy | |
| Minimum Operating Temperature | -55°C | |
| Maximum Operating Temperature | +125°C | |
| Välj alla | ||
|---|---|---|
Brand ITT Cannon | ||
Gender Male | ||
Wire Size 20 → 16 AWG | ||
Termination Method Crimp | ||
Series T2P | ||
For Use With Trident & APD 6/7 Way Connectors | ||
Current Rating 13A | ||
Contact Type Signal | ||
Length 27.69mm | ||
Contact Plating Tin | ||
Voltage Rating 30 V | ||
Contact Material Copper Alloy | ||
Minimum Operating Temperature -55°C | ||
Maximum Operating Temperature +125°C | ||
- COO (Country of Origin):
- DE
Signal Contacts
Two-part construction.Contacts may be crimped by a plier type or ratchet style tool.
Neptune
Based on Trident Ringlok series, the Neptune range combines power and signal contacts. Widely used in automotive, marine and process control industries, they feature a strong bayonet coupling system with standard and reversed pin/socket combinations. A wide selection of backshell accessories, rear housings and dust caps are available.,To maintain IP67 rating the rear of the connectors have a rubber seal which is pierced upon contact insertion. The seal is held in place by a screw ring (as supplied) which may be replaced with the appropriate size backshell. For IP67 rating to be maintained, wire insulation diameters should be within the following diameters: Signal wires: 1.7 to 2.7mm, Power wires : 2.7 to 4.0mm.,Number of contacts shown as power/signal eg 2//13.