INA Bearing Insert 30 mm ID 55 mm OD RALE30-XL-NPP-FA106

Se alla Bearing Inserts
Mängdrabatt möjlig

Antal (1 enhet)*

422,24 kr

(exkl. moms)

527,80 kr

(inkl. moms)

Add to Basket
välj eller skriv kvantitet
Tillfälligt slut
  • Leverans från den 09 mars 2026
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter
Per enhet
1 - 4422,24 kr
5 - 9405,66 kr
10 - 24397,04 kr
25 +388,42 kr

*vägledande pris

RS-artikelnummer:
137-1534
Tillv. art.nr:
RALE30-XL-NPP-FA106
Tillverkare / varumärke:
INA
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla

Brand

INA

Product Type

Bearing Insert

Inside Diameter

30 mm

Outside Diameter

55 mm

Static Load Rating

8.3kN

Dynamic Load Rating

14.1kN

End Type

Sealed

Standards/Approvals

No

Bore Type

Parallel

Radial Insert Ball Bearings with Eccentric Locking Collar


INA from Schaeffler classic radial insert ball bearings are located on the shaft with a locking collar. They are suitable for bearing arrangements with a constant direction of rotation or, under low speed and load, for an alternating direction of rotation.;The locking collar is preferably tightened in the direction of rotation and secured with a grub screw. This location method prevents damage to the shaft and can be easily loosened again.;The P seal is two zinc-coated sheet steel washers with intermediate NBR part, seal lip axially preloaded.;The R seal is two zinc-coated sheet steel washers extended outwards and angled downwards with intermediate NBR part and radially preloaded seal lip. Better protection against mechanical damage.

Substantial grease reservoir due to the space between the extended and angled sheet steel washers. Used in radial insert ball bearings with inner ring extended on both sides.;To protect the seal lip from mechanical damage, the outer sheet steel washer extends a considerable distance down towards the bearing inner ring.;In addition to bearings with a spherical outer ring (GRAE..-NPP-B and GE..-KRR-B), there are also cylindrical (RAE..-NPP and RALE..-NPP)

Features and Benefits


• Lower operating costs;• Reduced maintenance due to improved lubrication;• Lower heat generation;• Less noise;• Protected against fretting corrosion;• Shaft diameters from 12 mm to 60 mm (RAE..NPP) and (GRAE..-NPP-B);• Shaft diameters from 20 mm to 30 mm (RALE..NPP);• Shaft diameters from 17 mm to 120 mm (GE..-KRR-B)

Suffixes


FA106 - Bearing subjected to special noise testing;B - Bearing with special outer ring;NPP - Lip seals on both sides (P type seal);KRR - Lip seals on both sides (R type seal)

INA


relaterade länkar