Reamer Bits

When completing high-performance projects that require the forming of precise holes in or through materials, the sides of the hole may require additional work to ensure they are completely smooth. In this case, reamers are designed to completely smooth the hole to a high degree of accuracy.


Due to the removal of the uneven material, reaming will slightly enlarge the hole you have created, therefore making it advisable to form the initial hole fractionally smaller to allow for the reaming space – this is called the allowance. It is recommended that the drilled hole should not be enlarged by more than 5% of the drilled diameter.


Typically made from carbide or high-speed steel (HSS), these multi-edged rotary cutting tools are used in metalworking for enlarging and finishing holes to a high level of precision and accuracy.


What types of reamer are there?


At RS Components, we have both machine reamer bits and hand reamer bits. The main difference between the two is that hand reamer bits have a longer taper or lead in at the front end of the bit, which compensates for the difficulty of using hand power alone.


Straight reamer bits are used to make only minor enlargements to holes, typically ones used for the force-fitting of location dowel pins or for unthreaded shoulder bolts.


With helical/spiralled reamer bits, a clockwise reamer will pull any debris up and out of a blind hole, whereas an anti-clockwise reamer will push debris forward, which can be helpful when creating a through-hole.


A tapered reamer is used to make a tapered hole for a tapered pin, which is a self-tightening device due to the shallow angle of the taper. They are commonly used in aircraft assembly and may only be re-reamed a small number of times during an aircraft’s career.


Combination reamers have two or more cutting surfaces, cut to resemble the part’s multiple internal diameters. Using combination reamers reduces the number of separate operations as well as precisely creating relative depths and diameters.


Adjustable reamers consist of several blades along a tapered groove that can be adjusted to cover a small range of hole sizes. They are restricted to light usage due to the absence of any spiral in the flute, meaning they will only remove minimal material for each diameter setting, and cannot be used in holes that have an axial split.


...
Read more Read less

Filter

Visar 1 - 20 av 42 produkter
Resultat per sida
Beskrivning Pris Shank Type Diameter Overall Length Material
RS-artikelnummer 394-245
VarumärkeRS PRO
641,49 kr
Each
Enheter
Straight 7.75 → 8.5mm 100 mm HSS
RS-artikelnummer 394-302
VarumärkeRS PRO
1 236,04 kr
Each
Enheter
Straight 19 → 21mm 180 mm HSS
RS-artikelnummer 394-295
VarumärkeRS PRO
930,19 kr
Each
Enheter
Straight 15.25 → 17mm 165 mm HSS
RS-artikelnummer 394-289
VarumärkeRS PRO
832,68 kr
Each
Enheter
Straight 12.75 → 13.75mm 145 mm HSS
RS-artikelnummer 394-291
VarumärkeRS PRO
989,74 kr
Each
Enheter
Straight 17 → 19mm 170 mm HSS
RS-artikelnummer 394-239
VarumärkeRS PRO
1 465,20 kr
Each
Enheter
Straight 21 → 23mm 85.72 mm HSS
RS-artikelnummer 394-273
VarumärkeRS PRO
560,95 kr
Each
Enheter
Straight 7 → 7.75mm 90 mm HSS
RS-artikelnummer 394-285
VarumärkeRS PRO
904,85 kr
Each
Enheter
Straight 13.75 → 15.25mm 150 mm HSS
RS-artikelnummer 394-279
VarumärkeRS PRO
768,78 kr
Each
Enheter
Straight 11.75 → 12.75mm 130 mm HSS
RS-artikelnummer 188-2477
VarumärkeRS PRO
994,94 kr
Pr. Set
Sats(er)
Straight 14 mm, 18 mm, 22 mm 105 mm HSS
RS-artikelnummer 188-2503
VarumärkeRS PRO
499,09 kr
Each
Enheter
Morse Taper 14mm 152 mm HSS
RS-artikelnummer 188-2509
VarumärkeRS PRO
776,57 kr
Each
Enheter
Morse Taper 1in 7-1/4 in HSS
RS-artikelnummer 188-2508
VarumärkeRS PRO
470,06 kr
Each
Enheter
Morse Taper 1/2in 5-15/16 in HSS
RS-artikelnummer 394-251
VarumärkeRS PRO
730,73 kr
Each
Enheter
Straight 9.25 → 10mm 115 mm HSS
RS-artikelnummer 394-267
VarumärkeRS PRO
674,02 kr
Each
Enheter
Straight 10 → 10.75mm 125 mm HSS
RS-artikelnummer 188-2502
VarumärkeRS PRO
470,06 kr
Each
Enheter
Morse Taper 12mm 152 mm HSS
RS-artikelnummer 188-2507
VarumärkeRS PRO
428,07 kr
Each
Enheter
Morse Taper 3/8in 127 mm HSS
RS-artikelnummer 394-263
VarumärkeRS PRO
552,16 kr
Each
Enheter
Straight 6.5 → 7mm 85 mm HSS
RS-artikelnummer 394-241
VarumärkeRS PRO
671,17 kr
Each
Enheter
Straight 8.5 → 9.25mm 105 mm HSS
RS-artikelnummer 188-2501
VarumärkeRS PRO
428,07 kr
Each
Enheter
Morse Taper 10mm 127 mm HSS
Related Products
Fully adjustable between specified ranges, ideal for reaming ...
Description:
Fully adjustable between specified ranges, ideal for reaming solid or split bearings/bushes etc.
HSS Spiral Flute straight Morse Taper shank machine ...
Description:
HSS Spiral Flute straight Morse Taper shank machine reamer for opening and finishing existing holes to H7 toleranceSuitable most ferrous and non-ferrous materials7° helix, Left Hand Spiral for excellent surface finishManufactured to BS328 standards.
The RS PRO machine reamer bit has a ...
Description:
The RS PRO machine reamer bit has a diameter of 3/8in and 4 number of flutes. It has an overall length of 5in and cut-length of 3in. It is made of HSS and it can effortlessly fit into small holes. ...
HSS Spiral Flute straight shank machine reamer for ...
Description:
HSS Spiral Flute straight shank machine reamer for opening and finishing existing holes to H7 toleranceSuitable for most ferrous and non-ferrous materials6° helix, Left Hand Spiral for excellent surface finishManufactured to BS328 standard.