A Band Pass Filter is an electronic device or circuit that acts as a gatekeeper, allowing signals that fall between two specific frequencies to pass while discriminating against signals at other frequencies. The range of frequencies that can pass through the filter is referred to as the passband.
Applications
Band pass filters are widely used in radio frequency transmitters and receivers. In a transmitter a band pass filter limits the bandwidth of the output signal, restricting the emission of undesired frequencies. In a receiver a band pass filter can be used to prevent unwanted signals being detected and processed. In both applications the band pass filter minimises interference, allowing communications to be optimised.
Band Pass Filters
Filter
Visar 1 - 3 av 3 produkter
| Beskrivning | Pris | Series | Typical Centre Frequency | Maximum Current Rating | Maximum Voltage Rating | Termination Style | Package/Case | Mounting Type | Dimensions | Depth | Height | Length | Maximum Operating Temperature | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
|
RS-artikelnummer
701-3589
Tillv. art.nr920-CON0085-30
Varumärkeebm-papst
|
210,48 kr
Each
Enheter
|
920-CON0085 | - | 3A | 230 V ac | Tab | - | Flange Mount | 85 x 54 x 40.3mm | 54mm | 40.3mm | 85mm | +40°C |
|
Nytt
|
RS-artikelnummer
213-3378
Tillv. art.nrMLPF-WB-01E3
VarumärkeSTMicroelectronics
|
1,357 kr
Each (On a Reel of 5000)
Enheter
|
STM32WB | 2400 → 2500MHz | - | 200 V | - | Bumpless CSP | - | - | - | - | - | - |
|
Nytt
|
RS-artikelnummer
213-3379
Tillv. art.nrMLPF-WB-01E3
VarumärkeSTMicroelectronics
|
2,834 kr
Each (In a Pack of 50)
Enheter
|
STM32WB | 2400 → 2500MHz | - | 200 V | - | Bumpless CSP | - | - | - | - | - | - |
