Crimping Kits

Crimping is a way of terminating strands of wire in order to connect them to external circuits, using a crimping tool to squeeze a wire hard enough to cold weld it to a given terminal. Crimp terminal kits consist of a crimping tool and various types of terminal.


The advantage of crimping is that it forms gas-tight connections, so there is less corrosion of the wire, and the joints are mechanically strong as there is no additional material used, as opposed to soldering.


How do crimp terminal kits work?


There are broadly three steps to using crimp terminal kits:



  • Insert the desired terminal into the crimping tool

  • Insert the wire into the terminal

  • Squeeze together the handles of the crimping tool to cold weld the terminal onto the wire


Types of crimp terminal


Crimp terminals can have different connectors, such as rings, spades, and butt splice terminals, depending on how you want to connect to the external circuit. There are also insulated and non-insulated terminals, depending on your price point and the needs of the circuit. Non-insulated terminals are cheaper but may short in certain environments, whereas insulated terminals protect against this.


...
Read more Read less

Filter

Visar 21 - 36 av 36 produkter
Resultat per sida
Beskrivning Pris Type Connector Type Kit Contents Contact Plating Contact Material
RS-artikelnummer 613-9952
VarumärkeRS PRO
968,61 kr
Pr. Kit
Sats(er)
800 Piece Insulated Terminal Butt Splice, Pin terminals and Crimp Tool, Receptacle, Spade, 0.5mm² → 6mm² Ring - -
RS-artikelnummer 613-9974
VarumärkeRS PRO
995,59 kr
Pr. Kit
Sats(er)
750 Piece Insulated Terminal Spade and Butt Splice terminals, 0.5mm² → 6mm² Ring - -
RS-artikelnummer 803-4301
Tillv. art.nr1202580
VarumärkePhoenix Contact
3 722,48 kr
Each
Enheter
Crimp Terminal Ferrule AI 10-12 RD x 300, AI 16-12 BU x 200, AI 25-16 YE x 200, Crimpfox 25R x 1, Wirefox-D 40 x 1 - -
RS-artikelnummer 414-6633
Tillv. art.nr725929
VarumärkeTE Connectivity
1 724,16 kr
Each
Enheter
Automotive Service PIDG Splices/Terminals, Plasti-Grip Terminals Butt Splice, Electrotap, Female Bullet, Male Bullet, Male Receptacle, Piggyback, Pin, Receptacle, Ring, Superchamp II Tool - -
RS-artikelnummer 669-3661
Tillv. art.nr0 376 39
VarumärkeLegrand
3 091,86 kr
Each
Enheter
- - (1) Starfix Crimping Tool, (120) 0.5 mm² Ferrules, (120) 0.75 mm² Ferrules, (200) 2.5 mm² Ferrules, (240) 1 mm² Ferrules, (320) 1.5 mm² Ferrules - -
RS-artikelnummer 278-9395
Tillv. art.nr142945-1
VarumärkeTE Connectivity
5 853,04 kr
Each
Enheter
- Plasti-Grip Terminals and Splices Clip, Connection, Fork, Round Terminal - -
RS-artikelnummer 200-7032
Tillv. art.nrCOF-P
VarumärkeMECATRACTION
1 578,90 kr
Each
Enheter
Assorted Terminal Boxes Crimp Terminal Cable Ties, Crimp Terminal, Crimping Tool, End Splices, Sleeves - -
RS-artikelnummer 374-4315
Tillv. art.nr9025400000
VarumärkeWeidmüller
295,93 kr
Each
Enheter
- Bootlace Ferrule 4mm² → 16mm² Wire End Ferrules - -
RS-artikelnummer 414-6611
Tillv. art.nr165154
VarumärkeTE Connectivity
3 780,81 kr
Each
Enheter
Repair PIDG Splices/Terminals Faston Receptacle, Partition, PG Butt Splice, Ring Tongue, Spade, Wire Pin - -
RS-artikelnummer 847-8868
Tillv. art.nrKP-1075Y
VarumärkePanduit
850,45 kr
Each
Enheter
- Insulated Terminal (10) BSV10X, (10) BSV14X, (10) BSV18X, (10) DNF14-250, (10) DNF18-250, (10) JN418-212 Nylon Wire Joint, (10) PV10-8R, (20) PV18-6F, (20) PV18-8R Vinyl Ring Terminal, PV10-10R Vinyl Ring Terminal, PV14-10R, PV14-8F Vinyl Fork Terminal - -
RS-artikelnummer 414-6841
Tillv. art.nr9025920000
VarumärkeWeidmüller
344,98 kr
Each
Enheter
German Colour Coded Bootlace Ferrule - - -
RS-artikelnummer 243-1052
Tillv. art.nr165346
VarumärkeTE Connectivity
2 691,49 kr
Each
Enheter
PIDG Introduction Service PIDG Splices/Terminals, Plasti-Grip Terminals Case, Flanged Spade, Partition, PG Butt Splice, PIDG Ring Tongue, PIDG Spade, SRS Line Splice Connector, SRS PIDG Faton Receptacle, SRS PIDG Piggyback Faston - -
RS-artikelnummer 414-6835
Tillv. art.nr9025900000
VarumärkeWeidmüller
301,90 kr
Each
Enheter
- Bootlace Ferrule 0.5mm² → 2.5mm² Wire End Ferrules - -
RS-artikelnummer 220-6216
Tillv. art.nr06490820000
VarumärkeSES Sterling
241,13 kr
Each
Enheter
- Bootlace Ferrule Ferrules of 10 mm² x 20, Ferrules of 16 mm² x 10, Ferrules of 4 mm² x 50, Ferrules of 6 mm² x 20 - -
RS-artikelnummer 200-6907
Tillv. art.nrCOFTN50HX
VarumärkeMECATRACTION
6 933,93 kr
Each
Enheter
Assorted Box with Tubular Lugs and Crimping Tool Crimp Terminal Copper Tubular Lugs, Crimping Tool - Copper
RS-artikelnummer 243-1046
Tillv. art.nr165430
VarumärkeTE Connectivity
3 639,20 kr
Each
Enheter
- Plasti-Grip Terminals and Splices Butt Splice, Closed End Connector, Piggyback, Pin, Receptacle, Ring, Spade - -