Microchip ATWILC1000-MR110UB 1.8 to 3.6V WiFi Module SDIO, SPI

Se alla Wi-Fi Modules
Mängdrabatt möjlig

Antal (1 enhet)*

73,25 kr

(exkl. moms)

91,56 kr

(inkl. moms)

Add to Basket
välj eller skriv kvantitet
Tillfälligt slut
  • Leverans från den 09 mars 2026
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter
Per enhet
1 - 973,25 kr
10 - 2471,34 kr
25 - 9969,44 kr
100 +67,76 kr

*vägledande pris

RS-artikelnummer:
177-9618
Tillv. art.nr:
ATWILC1000-MR110UB
Tillverkare / varumärke:
Microchip
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla

Brand

Microchip

Supported Security Standards

WEP, WPA, WPA2

Supported Bus Interfaces

SDIO, SPI

Supply Voltage

1.8 to 3.6V

Dimensions

21.7 x 14.7 x 2.1mm

Height

2.1mm

Length

21.7mm

Maximum Operating Temperature

+85 °C

Minimum Operating Temperature

-40 °C

Width

14.7mm

COO (Country of Origin):
TW
Microchip's SmartConnect ATWILC1000 is an 802.11 b/g/n IoT link controller module. The ATWILC1000 connects to Microchip AVR/SMART MCUs, SMART MPUs, and other processors with minimal resource requirements with a simple SPI/SDIO-to-Wi-Fi interface. The ATWILC1000 supports single stream 1x1 802.11n mode providing tested throughput of up to 46 Mbps UDP & 28 Mbps TCP/IP. The ATWILC1000 features a fully integrated Power Amplifier, LNA, Switch and Power Management. The only external clock source needed is a high-speed crystal or oscillator. The ATWILC1000 can be used in Linux, RTOS or Baremetal Environments.

Integrated PA and T/R Switch
Superior Sensitivity and Range via advanced PHY signal processing
Wi-Fi Direct, station mode and Soft-AP support
Supports Personal & Enterprise WEP, WPA, WPA2 Security
On-chip memory management engine to reduce host load
SPI and SDIO host interfaces
Operating temperature range of -40C to +85C

relaterade länkar