John Drummond DRUMTL10, LED Voltage tester, 500V ac/dc, Mains Powered, CAT III 1000V

Se alla Voltage Testers

Antal (1 enhet)*

1 163,90 kr

(exkl. moms)

1 454,88 kr

(inkl. moms)

Add to Basket
välj eller skriv kvantitet
I lager
  • 19 enhet(er) är redo att levereras
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter
Per enhet
1 +1 163,90 kr

*vägledande pris

Kalibrerade alternativ:

presentation
John Drummond DRUMTL10, LED Voltage tester, 500V ac/dc, Mains Powered, CAT III 1000V With RS Calibration
Typ av kalibrering:
RSCAL
RS-artikelnummer
706-8707

Varje

1 747,90 kr

(exkl. moms)

2 184,88 kr

(inkl. moms)

RS-artikelnummer:
706-8573
Tillv. art.nr:
MTL10
Tillverkare / varumärke:
John Drummond
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla

Brand

John Drummond

Maximum Voltage

500V ac/dc

Safety Category

CAT III 1000 V, CAT IV 600V

Display Type

LED

IP Rating

IP67

Power Source

Mains

Dimensions

213 x 112 x 72mm

Weight

320g

Height

72mm

Length

213mm

Maximum Operating Temperature

+55°C

Safety Category Level

CAT III, CAT IV

Safety Category Voltage

600 V, 1000 V

Minimum Operating Temperature

-10°C

Model Number p

DRUMTL10

Width

112mm

RoHS-status: Inte relevant

COO (Country of Origin):
PH

Drummond Test Lamps MTL10


Bright LED indication of voltage between 50V and 500V AC/DC
Four distinct bands of illumination above 50, 100, 200 and 400V AC/DC with a 360o viewing angle even in bright sunlight
Identifies potentially lethal voltages at 50V and distinguishes between 110V, 230V and phase to phase voltages in 3 phase systems
Finger shields and insulated probe tips with only 4mm of exposed metal
Double insulated cable with white inner insulation gives a clear warning of abrasion and is heat and oil resistant
Meets the recommendations of the UK Health and Safety Executive in their guidance notes on the electrician’s test lamp (GS38)
Complies with BS EN 61243-3 and BS EN 61010. CAT IV 600V, CAT III 1000V
No batteries required

Caution

Test lamps should be proved safe before and after use, by testing on a known live circuit, using the continuity tester, or through the Martindale PD690 proving unit.

Supplied with

Carry case, right angled probe tip, two straight tips and instructions

Caution

Test lamps should be proved safe before and after use, by testing on a known live circuit, using the continuity tester, or through the Martindale PD690 proving unit


Mains Voltage Indicators - Contact

relaterade länkar