Microchip Voltage Supervisor 8-Pin SOIC, MCP130-315I/SN

Se alla Voltage Supervisors
Inte tillgänglig
RS kommer inte längre att lagerföra denna produkt.
RS-artikelnummer:
165-2009
Tillv. art.nr:
MCP130-315I/SN
Tillverkare / varumärke:
Microchip
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla

Brand

Microchip

Number of Supervisors

1

Output Driver

Active Low, Open Drain

Mounting Type

Surface Mount

Package Type

SOIC

Pin Count

8

Dimensions

5 x 3.99 x 1.55mm

Maximum Monitored Voltage

3.15V

Maximum Operating Supply Voltage

5.5 V

Maximum Operating Temperature

+85 °C

Minimum Operating Temperature

-40 °C

Minimum Monitored Voltage

3.07V

Minimum Operating Supply Voltage

1 V

COO (Country of Origin):
TH

MCP130 Microcontroller Supervisory and Reset Circuit


The Microchip MCP130 is a Voltage Supervisor that holds a Microcontroller or other device in Reset during under-voltage conditions. During Start-Up and Brownout events the MCP130 asserts a Reset signal via an active-low Reset Pin. Integrated into the MCP130 is an internal 5 kΩ Pull-Up Resistor.

Features


Holds Microcontroller in Reset until supply voltage reaches stable operating level
Resets Microcontroller during power loss
Active low RESET pin
Open drain output
Internal 5 kΩ Pull-Up Resistor
Holds RESET for 350 ms (typical)
RESET to VCC = 1.0V
Accuracy of ±125 mV for 5V systems, ±75 mV for 3V systems over temperature
45 μA typical operating current


Supervisory & Reset Circuits - Microchip

relaterade länkar