Microchip MIC5201YM, 1 Low Dropout Voltage, Voltage Regulator 200mA, 1.24 → 26 V 8-Pin, SOIC

Se alla Voltage Regulators
Inte tillgänglig
RS kommer inte längre att lagerföra denna produkt.
RS-artikelnummer:
177-0784
Tillv. art.nr:
MIC5201YM
Tillverkare / varumärke:
Microchip
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla

Brand

Microchip

Maximum Output Current

200mA

Regulator Type

Low Dropout Voltage

Output Voltage

1.24 → 26 V

Number of Outputs

1

Line Regulation

0.4 %

Accuracy

±2%

Load Regulation

0.3 %

Mounting Type

Surface Mount

Quiescent Current

0.01 (Typ.)µA

Package Type

SOIC

Reference Voltage

1.26V

Pin Count

8

Output Type

Adjustable

Dimensions

4.93 x 3.94 x 1.48mm

Minimum Operating Temperature

-40 °C

Maximum Input Voltage

26 V

Height

1.48mm

Maximum Operating Temperature

+125 °C

Minimum Input Voltage

2.5 V

Length

4.93mm

Width

3.94mm

The MIC5201 is an efficient linear voltage regulator with very low dropout voltage (typically 17mV at light loads and 200mV at 100mA) and very low ground current (1mA at 100mA output), offering better than 1% initial accuracy with a logic-compatible on-off switching input.Designed especially for handheld battery-powered devices, the MIC5201 can be switched by a CMOS- or TTL-compatible enable signal. This enable control may be connected directly to VIN if unneeded.

High output voltage accuracy
Variety of output voltages
Guaranteed 200mA output
Low quiescent current
Low dropout voltage
Extremely tight load and line regulation
High output voltage accuracy
Variety of output voltages
Guaranteed 200mA output
Low quiescent current
Low dropout voltage
Extremely tight load and line regulation
Very low temperature coefficient
Current and thermal limiting
Reversed battery protection
Load-dump protection (fixed voltage versions)
Zero off-mode current state
Logic-controlled electronic enable

relaterade länkar