Specifikationer

Datablad

Lagstiftning och ursprungsland

Produktdetaljer

Hitta liknande produkter genom att välja ett eller flera attribut.

Välj alla	Attribut	Värde
	Brand	onsemi
	Maximum Output Current	1A
	Regulator Type	Low Dropout Voltage
	Output Voltage	2.5 V
	Number of Outputs	1
	Line Regulation	0.5 mV
	Accuracy	±1%
	Load Regulation	3.3 mV
	Polarity	Positive
	Mounting Type	Surface Mount
	Package Type	DPAK
	Quiescent Current	3.6mA
	Pin Count	3
	Output Type	Fixed
	Dimensions	6.73 x 6.22 x 2.38mm
	Maximum Operating Temperature	+125 °C
	Height	2.38mm
	Minimum Operating Temperature	0 °C
	Maximum Input Voltage	20 V
	Width	6.22mm
	Length	6.73mm

	Välj alla
	Brand onsemi
	Maximum Output Current 1A
	Regulator Type Low Dropout Voltage
	Output Voltage 2.5 V
	Number of Outputs 1
	Line Regulation 0.5 mV
	Accuracy ±1%
	Load Regulation 3.3 mV
	Polarity Positive
	Mounting Type Surface Mount
	Package Type DPAK
	Quiescent Current 3.6mA
	Pin Count 3
	Output Type Fixed
	Dimensions 6.73 x 6.22 x 2.38mm
	Maximum Operating Temperature +125 °C
	Height 2.38mm
	Minimum Operating Temperature 0 °C
	Maximum Input Voltage 20 V
	Width 6.22mm
	Length 6.73mm

NCP1117 and NCV1117 Series LDO Regulators, ON Semiconductor

The NCP1117 and NCV1117 series of LDO positive fixed and adjustable voltage regulators have an output current in excess of 1A. Available in either SOT-223 or DPAK packages, they also come in a range of different output voltage options, fixed or adjustable. The fixed voltages have no minimum load requirement to maintain regulation. There is also adjustable output voltage options which can be programmed from 1.25 to 18.8 V.
In comparison to other three-terminal adjustable regulators, the NCP1117 devices feature a large reduction in dropout voltage with improved output voltage accuracy and temperature stability.

• Output current in excess of 1A
• Fixed or variable voltage options
• 1.2V Dropout Voltage (max) @ 800mA Over Temperature
• Current limit and thermal shutdown protection
• NCV part numbers are for automotive applications

Applications
• Consumer and Industrial Equipment Point of Regulation
• Active SCSI Termination for 2.85 V Version
• Switching Power Supply Post Regulation
• Hard Drive Controllers
• Battery Chargers

LDO (Low Dropout) Linear Voltage Regulators, ON Semiconductor

The Low dropout or LDO is a linear voltage regulator. We have a wide range of linear regulators. The LDO regulator can operate with a small input–output differential voltage. LDO voltage regulators may offer fast transient response, wide input voltage range, low quiescent current and low noise with high PSRR.

onsemi NCP1117DT25RKG, 1 Low Dropout Voltage, Voltage Regulator 1A, 2.5 V 3-Pin, DPAK

NCP1117 and NCV1117 Series LDO Regulators, ON Semiconductor

relaterade länkar