Microchip, LOD Voltage Regulator 6V SOT-223 5-Pin
- RS-artikelnummer:
- 352-251P
- Tillv. art.nr:
- MCP1825T-3302E/DC
- Tillverkare / varumärke:
- Microchip
Mängdrabatt möjlig
Antal 50 enheter (levereras på en kontinuerlig remsa)*
552,20 kr
(exkl. moms)
690,25 kr
(inkl. moms)
GRATIS leverans för online beställningar över 500,00 kr
Tillfälligt slut
- 3 995 enhet(er) är redo att levereras
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter | Per enhet |
|---|---|
| 50 - 95 | 11,044 kr |
| 100 - 495 | 10,26 kr |
| 500 - 995 | 9,498 kr |
| 1000 + | 9,14 kr |
*vägledande pris
- RS-artikelnummer:
- 352-251P
- Tillv. art.nr:
- MCP1825T-3302E/DC
- Tillverkare / varumärke:
- Microchip
Specifikationer
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla | Attribut | Värde |
|---|---|---|
| Brand | Microchip | |
| Product Type | LOD Voltage Regulator | |
| Package Type | SOT-223 | |
| Quiescent Current | 120μA | |
| Pin Count | 5 | |
| Height | 1.8mm | |
| Series | MCP1825 | |
| Width | 7.3 mm | |
| Standards/Approvals | AEC-Q100 | |
| Length | 6.7mm | |
| Maximum Operating Temperature | 125°C | |
| Minimum Input Voltage | 2.1V | |
| Maximum Input Voltage | 6V | |
| Automotive Standard | AEC-Q100 | |
| Välj alla | ||
|---|---|---|
Brand Microchip | ||
Product Type LOD Voltage Regulator | ||
Package Type SOT-223 | ||
Quiescent Current 120μA | ||
Pin Count 5 | ||
Height 1.8mm | ||
Series MCP1825 | ||
Width 7.3 mm | ||
Standards/Approvals AEC-Q100 | ||
Length 6.7mm | ||
Maximum Operating Temperature 125°C | ||
Minimum Input Voltage 2.1V | ||
Maximum Input Voltage 6V | ||
Automotive Standard AEC-Q100 | ||
The Microchip 500 mA Low Dropout (LDO) linear regulator that provides high current and low output voltages. The MCP1825 comes in a fixed or adjustable output voltage version, with an output voltage range of 0.8V to 5.0V. The 500 mA output current capability, combined with the low output voltage capability, make the MCP1825 a good choice for new sub-1.8V output voltage LDO applications that have high current demands. The MCP1825S is a 3-pin fixed voltage version. The MCP1825/MCP1825S is stable using ceramic output capacitors that inherently provide lower output noise and reduce the size and cost of the entire regulator solution. Only 1 μF of output capacitance is needed to stabilize the LDO.
Low dropout voltage 210 mV typical at 500 mA
Output voltage from 0.8V to 5.0V both fixed and adjustable
Stable with 1.0 μF ceramic output capacitor
Power good output with adjustable delay
Low supply current: 120 μA (typ)