Infineon CY7C65631-56LTXI, Controller IC 480 Mbps, 3.45 V, USB, 3.15 V, 56-Pin VQFN
- RS-artikelnummer:
- 273-2661
- Tillv. art.nr:
- CY7C65631-56LTXI
- Tillverkare / varumärke:
- Infineon
För närvarande inte tillgänglig
Tyvärr, vi vet inte när detta kommer att finnas i lager igen.
- RS-artikelnummer:
- 273-2661
- Tillv. art.nr:
- CY7C65631-56LTXI
- Tillverkare / varumärke:
- Infineon
Specifikationer
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla | Attribut | Värde |
|---|---|---|
| Brand | Infineon | |
| Maximum Data Rate | 480Mbps | |
| Product Type | Controller IC | |
| Sub Type | USB Controller | |
| USB Specification | USB 2.0 | |
| Power Supply Type | Single | |
| ESD Protection | Yes | |
| Minimum Supply Voltage | 3.15V | |
| Maximum Supply Voltage | 3.45V | |
| Mount Type | Surface | |
| Package Type | VQFN | |
| Pin Count | 56 | |
| Supported Protocols | USB | |
| Minimum Operating Temperature | 0°C | |
| Maximum Operating Temperature | 70°C | |
| Width | 8 mm | |
| Series | CY7C65631 | |
| Standards/Approvals | USB-IF: TID 30000009, USB 2.0 specification, Windows Hardware Quality Lab (WHQL) | |
| Automotive Standard | No | |
| Välj alla | ||
|---|---|---|
Brand Infineon | ||
Maximum Data Rate 480Mbps | ||
Product Type Controller IC | ||
Sub Type USB Controller | ||
USB Specification USB 2.0 | ||
Power Supply Type Single | ||
ESD Protection Yes | ||
Minimum Supply Voltage 3.15V | ||
Maximum Supply Voltage 3.45V | ||
Mount Type Surface | ||
Package Type VQFN | ||
Pin Count 56 | ||
Supported Protocols USB | ||
Minimum Operating Temperature 0°C | ||
Maximum Operating Temperature 70°C | ||
Width 8 mm | ||
Series CY7C65631 | ||
Standards/Approvals USB-IF: TID 30000009, USB 2.0 specification, Windows Hardware Quality Lab (WHQL) | ||
Automotive Standard No | ||
The Infineon USB 2.0 hub controllers is an ultra low power single chip USB 2.0 hub controller with integrated upstream and downstream transceivers. USB 2.0 Hubs are high performance, low system cost solutions for USB. The Hubs integrate 1.5 kilo ohm upstream pull up resistors for full speed operation and all downstream 15 kilo ohm pull down resistors. This results in optimization of system costs by providing built in support for the USB 2.0 specification.
Bus power configurations
Space saving 56 pin QFN
In system EEPROM programming
Integrated port status indicator control
Up to four downstream ports supported
relaterade länkar
- Infineon CY7C65630-56LTXI USB 2.0 56-Pin QFN
- Infineon CY7C65620-56LTXI USB 2.0 56-Pin QFN
- Infineon CY7C65631-56LTXC USB 2.0 56-Pin QFN
- Infineon CY7C65621-56LTXI USB 2.0 56-Pin QFN
- Infineon CY7C65620-56LTXC USB 2.0 56-Pin QFN
- Infineon CY7C65630-56LTXCT USB 2.0 56-Pin QFN
- Infineon CY7C65630-56LTXC USB 2.0 56-Pin QFN
- Infineon CY7C68013A-56LTXI 12Mbps 3 to 3.6 V, 56-Pin QFN
