Infineon, Controller IC 480 Mbps, 3.45 V, USB, 3.15 V, 56-Pin VQFN
- RS-artikelnummer:
- 273-2656
- Tillv. art.nr:
- CY7C65630-56LTXC
- Tillverkare / varumärke:
- Infineon
Mängdrabatt möjlig
Antal (1 enhet)*
290,36 kr
(exkl. moms)
362,95 kr
(inkl. moms)
Lägg till 2 enheter för att få fri frakt
Sista RS lager
- Slutlig(a) 90 enhet(er), redo att levereras
Enheter | Per enhet |
|---|---|
| 1 - 9 | 290,36 kr |
| 10 - 24 | 282,46 kr |
| 25 - 49 | 275,30 kr |
| 50 - 99 | 268,02 kr |
| 100 + | 261,63 kr |
*vägledande pris
- RS-artikelnummer:
- 273-2656
- Tillv. art.nr:
- CY7C65630-56LTXC
- Tillverkare / varumärke:
- Infineon
Specifikationer
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla | Attribut | Värde |
|---|---|---|
| Brand | Infineon | |
| Product Type | Controller IC | |
| Maximum Data Rate | 480Mbps | |
| USB Specification | USB 2.0 | |
| Sub Type | USB Controller | |
| Power Supply Type | Single | |
| ESD Protection | Yes | |
| Maximum Supply Voltage | 3.45V | |
| Minimum Supply Voltage | 3.15V | |
| Mount Type | Surface | |
| Package Type | VQFN | |
| Pin Count | 56 | |
| Supported Protocols | USB | |
| Minimum Operating Temperature | 0°C | |
| Maximum Operating Temperature | 70°C | |
| Width | 8 mm | |
| Standards/Approvals | USB 2.0 specification, USB-IF: TID 30000009 | |
| Series | CY7C65630 | |
| Automotive Standard | No | |
| Välj alla | ||
|---|---|---|
Brand Infineon | ||
Product Type Controller IC | ||
Maximum Data Rate 480Mbps | ||
USB Specification USB 2.0 | ||
Sub Type USB Controller | ||
Power Supply Type Single | ||
ESD Protection Yes | ||
Maximum Supply Voltage 3.45V | ||
Minimum Supply Voltage 3.15V | ||
Mount Type Surface | ||
Package Type VQFN | ||
Pin Count 56 | ||
Supported Protocols USB | ||
Minimum Operating Temperature 0°C | ||
Maximum Operating Temperature 70°C | ||
Width 8 mm | ||
Standards/Approvals USB 2.0 specification, USB-IF: TID 30000009 | ||
Series CY7C65630 | ||
Automotive Standard No | ||
The Infineon USB 2.0 hub controllers is an ultra low power single chip USB 2.0 hub controller with integrated upstream and downstream transceivers. USB 2.0 Hubs are high performance, low system cost solutions for USB. The Hubs integrate 1.5 kilo ohm upstream pull up resistors for full speed operation and all downstream 15 kilo ohm pull down resistors. This results in optimization of system costs by providing built in support for the USB 2.0 specification.
Bus power configurations
Space saving 56 pin QFN
In system EEPROM programming
Integrated port status indicator control
Up to four downstream ports supported