Infineon CY7C65213-28PVXIT, USB Controller 12 Mbps, 5.5 V, USB, 1.71 V, 28-Pin SSOP
- RS-artikelnummer:
- 273-2641
- Tillv. art.nr:
- CY7C65213-28PVXIT
- Tillverkare / varumärke:
- Infineon
Antal (1 rulle med 1000 enheter)*
16 343,00 kr
(exkl. moms)
20 429,00 kr
(inkl. moms)
GRATIS leverans för online beställningar över 500,00 kr
Tillfälligt slut
- Leverans från den 05 juni 2026
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter | Per enhet | Per rulle* |
|---|---|---|
| 1000 + | 16,343 kr | 16 343,00 kr |
*vägledande pris
- RS-artikelnummer:
- 273-2641
- Tillv. art.nr:
- CY7C65213-28PVXIT
- Tillverkare / varumärke:
- Infineon
Specifikationer
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla | Attribut | Värde |
|---|---|---|
| Brand | Infineon | |
| Maximum Data Rate | 12Mbps | |
| Product Type | USB Controller | |
| USB Specification | USB 1.1 | |
| Sub Type | USB Controller | |
| Power Supply Type | Single | |
| ESD Protection | Yes | |
| Maximum Supply Voltage | 5.5V | |
| Minimum Supply Voltage | 1.71V | |
| Mount Type | Surface | |
| Package Type | SSOP | |
| Pin Count | 28 | |
| Supported Protocols | USB | |
| Minimum Operating Temperature | 0°C | |
| Maximum Operating Temperature | 70°C | |
| Series | CY7C65213 | |
| Standards/Approvals | RoHS | |
| Automotive Standard | No | |
| Välj alla | ||
|---|---|---|
Brand Infineon | ||
Maximum Data Rate 12Mbps | ||
Product Type USB Controller | ||
USB Specification USB 1.1 | ||
Sub Type USB Controller | ||
Power Supply Type Single | ||
ESD Protection Yes | ||
Maximum Supply Voltage 5.5V | ||
Minimum Supply Voltage 1.71V | ||
Mount Type Surface | ||
Package Type SSOP | ||
Pin Count 28 | ||
Supported Protocols USB | ||
Minimum Operating Temperature 0°C | ||
Maximum Operating Temperature 70°C | ||
Series CY7C65213 | ||
Standards/Approvals RoHS | ||
Automotive Standard No | ||
The Infineon USB Controller is a fully integrated USB to UART bridge that provides a simple method to upgrade UART based devices to USB with a minimal number of components. It includes a USB 2.0 full speed controller, a UART transceiver, an internal regulator, an internal oscillator and a 512 byte flash in 28 pin SSOP package. The internal flash is used to store custom specific USB descriptors and GPIO configuration. This is done in system using a configuration utility that communicates over the USB interface.
Data rates up to 3 Mbps
USB suspend mode for low power
Integrated USB termination resistors
Single channel configurable UART interface
relaterade länkar
- Infineon CY7C65213A-28PVXI 3Mbps USB 3.0 28-Pin SSOP
- Infineon CY7C65213-28PVXI 3Mbps USB 3.0 28-Pin SSOP
- Infineon CY7C65211-24LTXIT 12Mbps 1.71 to 5.5 V, 24-Pin QFN
- Microchip MCP2200-I/SS 12Mbps 5.5 V, 20-Pin SSOP
- Infineon CY7C65213-28PVXIT
- Microchip MCP2210T-I/SS 12Mbps 3 → 5.5 V, 20-Pin SSOP
- Microchip MCP2200T-I/SS 12Mbps 3 → 5.5 V, 20-Pin SSOP
- Infineon CY7C65213-32LTXI 3Mbps USB 3.0 32-Pin QFN
