Infineon, Controller IC 12 Mbps, 5.5 V, USB, 1.71 V, 24-Pin VQFN
- RS-artikelnummer:
- 273-2640
- Tillv. art.nr:
- CY7C65211-24LTXIT
- Tillverkare / varumärke:
- Infineon
Mängdrabatt möjlig
Antal (1 enhet)*
35,76 kr
(exkl. moms)
44,70 kr
(inkl. moms)
GRATIS leverans för online beställningar över 500,00 kr
I lager
- Dessutom levereras 100 enhet(er) från den 16 januari 2026
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter | Per enhet |
|---|---|
| 1 - 49 | 35,76 kr |
| 50 - 99 | 30,46 kr |
| 100 - 249 | 26,43 kr |
| 250 + | 25,09 kr |
*vägledande pris
- RS-artikelnummer:
- 273-2640
- Tillv. art.nr:
- CY7C65211-24LTXIT
- Tillverkare / varumärke:
- Infineon
Specifikationer
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla | Attribut | Värde |
|---|---|---|
| Brand | Infineon | |
| Maximum Data Rate | 12Mbps | |
| Product Type | Controller IC | |
| USB Specification | USB 2.0 | |
| Sub Type | USB Controller | |
| Power Supply Type | USB 2.0 | |
| ESD Protection | Yes | |
| Maximum Supply Voltage | 5.5V | |
| Minimum Supply Voltage | 1.71V | |
| Mount Type | Surface | |
| Package Type | VQFN | |
| Pin Count | 24 | |
| Minimum Operating Temperature | -40°C | |
| Supported Protocols | USB | |
| Maximum Operating Temperature | 85°C | |
| Width | 4 mm | |
| Series | CY7C65211 | |
| Standards/Approvals | USB 2.0-certified | |
| Automotive Standard | No | |
| Välj alla | ||
|---|---|---|
Brand Infineon | ||
Maximum Data Rate 12Mbps | ||
Product Type Controller IC | ||
USB Specification USB 2.0 | ||
Sub Type USB Controller | ||
Power Supply Type USB 2.0 | ||
ESD Protection Yes | ||
Maximum Supply Voltage 5.5V | ||
Minimum Supply Voltage 1.71V | ||
Mount Type Surface | ||
Package Type VQFN | ||
Pin Count 24 | ||
Minimum Operating Temperature -40°C | ||
Supported Protocols USB | ||
Maximum Operating Temperature 85°C | ||
Width 4 mm | ||
Series CY7C65211 | ||
Standards/Approvals USB 2.0-certified | ||
Automotive Standard No | ||
The Infineon USB Controller enables seamless PC connectivity for peripherals with serial interfaces, such as UART, SPI and I2C. It is also integrates CAPSENSE™ and BCD compliant with the USB battery charging specification, Rev. 1.2. It integrates a voltage regulator, an oscillator and flash memory for storing configuration parameters, offering a cost effective solution. It supports bus powered and self powered modes and enables efficient system power management with suspend and remote wake up signals. It is available in a 24 pin QFN package.
Data rates up to 3 Mbps
Full speed USB 2.0 certified
Integrated USB termination resistors
Single channel configurable SPI interface
Single channel configurable UART interface