FTDI Chip FT232HPQ-TRAY, USB Controller, 12Mbps, USB 2.0, 3.3 V, 56-Pin QFN 56
- RS-artikelnummer:
- 228-3123P
- Tillv. art.nr:
- FT232HPQ-TRAY
- Tillverkare / varumärke:
- FTDI Chip
Mängdrabatt möjlig
Antal 10 enheter (levereras på en bricka)*
507,40 kr
(exkl. moms)
634,20 kr
(inkl. moms)
GRATIS leverans för online beställningar över 500,00 kr
I lager
- 679 enhet(er) är redo att levereras
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter | Per enhet |
|---|---|
| 10 - 99 | 50,74 kr |
| 100 + | 49,39 kr |
*vägledande pris
- RS-artikelnummer:
- 228-3123P
- Tillv. art.nr:
- FT232HPQ-TRAY
- Tillverkare / varumärke:
- FTDI Chip
Specifikationer
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla | Attribut | Värde |
|---|---|---|
| Brand | FTDI Chip | |
| Number of Transceivers | 1 | |
| Data Rate | 12Mbps | |
| IC Type | Controller IC | |
| Protocols Supported | USB 2.0 | |
| Power Supply Type | Single | |
| ESD Protection | Yes | |
| Typical Single Supply Voltage | 3.3 V | |
| Package Type | QFN 56 | |
| Pin Count | 56 | |
| Välj alla | ||
|---|---|---|
Brand FTDI Chip | ||
Number of Transceivers 1 | ||
Data Rate 12Mbps | ||
IC Type Controller IC | ||
Protocols Supported USB 2.0 | ||
Power Supply Type Single | ||
ESD Protection Yes | ||
Typical Single Supply Voltage 3.3 V | ||
Package Type QFN 56 | ||
Pin Count 56 | ||
The FTDI Chip FT233HP/FT232HP is a Hi-Speed USB device with Type-C/PD 3.0 controller IC that fully supports the latest USB Type-C and Power Delivery (PD) standards enabling support for power negotiation with the ability to sink or source current to a USB host device. The USB bridge function delivers 1 independent channel compatible with the FT232H – Single Hi-speed USB to multipurpose UART/FIFO solution.
Supports PD Specification 3.0.
1 x USB PD 3.0 Port supports Dual Role Swap Function
Supports 5V3A, 9V3A, 12V3A, 15V3A, 20V3A and more PDOs as sink or source.
Type-C/PD Physical Layer Protocol.
PD policy engine using 32-bit RISC controller with 8kB data RAM and 48kB code ROM.
PD mode configuration through external EEPROM.
Options to use external MCU controlling PD policy through I2C interface.
Up to 8 Configurable PD GPIO pins support.
External MCU support through I2C bus.
1 x USB PD 3.0 Port supports Dual Role Swap Function
Supports 5V3A, 9V3A, 12V3A, 15V3A, 20V3A and more PDOs as sink or source.
Type-C/PD Physical Layer Protocol.
PD policy engine using 32-bit RISC controller with 8kB data RAM and 48kB code ROM.
PD mode configuration through external EEPROM.
Options to use external MCU controlling PD policy through I2C interface.
Up to 8 Configurable PD GPIO pins support.
External MCU support through I2C bus.