FTDI Chip FT4232HQ-REEL, USB Controller, 12Mbps, 3.3 V, 64-Pin QFN
- RS-artikelnummer:
- 196-6432P
- Tillv. art.nr:
- FT4232HQ-REEL
- Tillverkare / varumärke:
- FTDI Chip
Mängdrabatt möjlig
Antal 50 enheter (levereras på en kontinuerlig remsa)*
3 360,00 kr
(exkl. moms)
4 200,00 kr
(inkl. moms)
GRATIS leverans för online beställningar över 500,00 kr
Tillfälligt slut
- 3 997 enhet(er) levereras från den 17 juni 2026
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter | Per enhet |
|---|---|
| 50 - 99 | 67,20 kr |
| 100 - 499 | 65,52 kr |
| 500 - 1999 | 63,84 kr |
| 2000 + | 62,16 kr |
*vägledande pris
- RS-artikelnummer:
- 196-6432P
- Tillv. art.nr:
- FT4232HQ-REEL
- Tillverkare / varumärke:
- FTDI Chip
Specifikationer
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla | Attribut | Värde |
|---|---|---|
| Brand | FTDI Chip | |
| Number of Transceivers | 1 | |
| Data Rate | 12Mbps | |
| IC Type | Controller IC | |
| Power Supply Type | Single | |
| ESD Protection | Yes | |
| Typical Single Supply Voltage | 3.3 V | |
| Mounting Type | Surface Mount | |
| Package Type | QFN | |
| Pin Count | 64 | |
| Dimensions | 9 x 9 x 0.85mm | |
| Height | 0.85mm | |
| Length | 9mm | |
| Maximum Operating Temperature | +85 °C | |
| Width | 9mm | |
| Minimum Operating Temperature | -40 °C | |
| Välj alla | ||
|---|---|---|
Brand FTDI Chip | ||
Number of Transceivers 1 | ||
Data Rate 12Mbps | ||
IC Type Controller IC | ||
Power Supply Type Single | ||
ESD Protection Yes | ||
Typical Single Supply Voltage 3.3 V | ||
Mounting Type Surface Mount | ||
Package Type QFN | ||
Pin Count 64 | ||
Dimensions 9 x 9 x 0.85mm | ||
Height 0.85mm | ||
Length 9mm | ||
Maximum Operating Temperature +85 °C | ||
Width 9mm | ||
Minimum Operating Temperature -40 °C | ||
The FT4232H is FTDI’s 5th generation of USB devices. The FT4232H is a USB 2.0 Hi-Speed (480Mb/s) to UART IC. It has the capability of being configured in a variety of industry standard serial or parallel interfaces. The FT4232H features 4 UARTs. Two of these have an option to independently configure an MPSSE engine, this allows the FT4232H to operate as two UART/Bit-Bang ports plus two MPSSE engines used to emulate JTAG, SPI, I2C, Bit-bang or other synchronous serial modes. The FT4232H is available in Pb-free 64-pin LQFP/QFN and 56-pin VQFN packages.