Microchip USB3300-EZK-TR, USB Transceiver, 3-Channel, 3.3 V, UTMI + ULPI, OTG, USB 2.0, 3.3 V, 32-Pin QFN

Se alla USB Interface ICs

Antal (1 förpackning med 10 enheter)*

146,22 kr

(exkl. moms)

182,78 kr

(inkl. moms)

Add to Basket
välj eller skriv kvantitet
I lager
  • Dessutom levereras 3 470 enhet(er) från den 16 januari 2026
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter
Per enhet
Per förpackning*
10 +14,622 kr146,22 kr

*vägledande pris

Förpackningsalternativ:
RS-artikelnummer:
177-9859
Tillv. art.nr:
USB3300-EZK-TR
Tillverkare / varumärke:
Microchip
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla

Brand

Microchip

Product Type

USB Transceiver

Number of Transceivers

3

Sub Type

Transceiver

USB Specification

USB 2.0

Power Supply Type

Single

ESD Protection

Yes

Maximum Supply Voltage

3.3V

Minimum Supply Voltage

3.3V

Mount Type

Surface

Package Type

QFN

Pin Count

32

Supported Protocols

UTMI + ULPI, OTG, USB 2.0

Minimum Operating Temperature

-40°C

Maximum Operating Temperature

85°C

Standards/Approvals

No

Height

0.95mm

Series

USB3300

Width

5.1 mm

Length

5.1mm

Automotive Standard

No

COO (Country of Origin):
TW
The USB3300 is an industrial temperature Hi-Speed USB Physical Layer Transceiver (PHY). The USB3300 uses a low pin count interface (ULPI) to connect to a ULPI compliant Link layer. The ULPI interface reduces the UTMI+ interface from 54 pins to 12 pins using a method of in-band signaling and status byte transfers between the Link and PHY. This PHY was designed from the start with the ULPI interface. No UTMI to ULPI wrappers are used in this design which provides a seamless ULPI to Link interface. The result is a PHY with a low latency transmit and receive time.

USB-IF Hi-Speed

Latch-Up performance exceeds 150 mA

ESD protection levels of ±8kV HBM without external protection devices

Includes full support for the optional On-The-Go (OTG) protocol

Supports the OTG Host Negotiation Protocol (HNP) and Session Request Protocol (SRP)

Allows host to turn VBUS off to conserve battery power in OTG applications

Internal 1.8 volt regulators allow operation from a single 3.3 volt supply

relaterade länkar