Microchip, Controller IC, 3.6 V, USB 2.0, 3.3 V, 24-Pin SQFN
- RS-artikelnummer:
- 177-9718P
- Tillv. art.nr:
- USB2422/MJ
- Tillverkare / varumärke:
- Microchip
Antal 5 enheter (levereras på en bricka)*
77,42 kr
(exkl. moms)
96,775 kr
(inkl. moms)
GRATIS leverans för online beställningar över 500,00 kr
I lager
- 1 895 enhet(er) är redo att levereras
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter | Per enhet |
|---|---|
| 5 + | 15,484 kr |
*vägledande pris
- RS-artikelnummer:
- 177-9718P
- Tillv. art.nr:
- USB2422/MJ
- Tillverkare / varumärke:
- Microchip
Specifikationer
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla | Attribut | Värde |
|---|---|---|
| Brand | Microchip | |
| Product Type | Controller IC | |
| Sub Type | Controller | |
| USB Specification | USB 2.0 | |
| Power Supply Type | Single | |
| ESD Protection | Yes | |
| Minimum Supply Voltage | 3.3V | |
| Maximum Supply Voltage | 3.6V | |
| Mount Type | Surface | |
| Package Type | SQFN | |
| Pin Count | 24 | |
| Supported Protocols | USB 2.0 | |
| Minimum Operating Temperature | 0°C | |
| Maximum Operating Temperature | 70°C | |
| Height | 0.95mm | |
| Width | 4.1 mm | |
| Standards/Approvals | No | |
| Length | 4.1mm | |
| Series | USB2422 | |
| Automotive Standard | No | |
| Välj alla | ||
|---|---|---|
Brand Microchip | ||
Product Type Controller IC | ||
Sub Type Controller | ||
USB Specification USB 2.0 | ||
Power Supply Type Single | ||
ESD Protection Yes | ||
Minimum Supply Voltage 3.3V | ||
Maximum Supply Voltage 3.6V | ||
Mount Type Surface | ||
Package Type SQFN | ||
Pin Count 24 | ||
Supported Protocols USB 2.0 | ||
Minimum Operating Temperature 0°C | ||
Maximum Operating Temperature 70°C | ||
Height 0.95mm | ||
Width 4.1 mm | ||
Standards/Approvals No | ||
Length 4.1mm | ||
Series USB2422 | ||
Automotive Standard No | ||
The Microchip USB2422 hub is a low-power, single transaction translator, hub controller IC with two downstream ports for embedded USB solutions. The Microchip hub controller can attach to an upstream port as a Hi-Speed and Full-Speed hub or as a Full-Speed only hub. The Microchip hub supports Low-Speed, Full-Speed, and Hi-Speed (when configured as a Hi-Speed hub) downstream devices on the enabled downstream ports.
High performance, low-power, small footprint hub controller IC with two downstream ports
Optimized for minimal bill-of-materials and low-cost designs
Supports the USB Battery Charging Specification, Revision 1.1
Fully integrated USB termination and pull-up/pulldown resistors
Supports a single external 3.3 V supply source, internal regulators provide 1.2 V internal core voltage
On-chip driver for 24 MHz crystal resonator or external 24 MHz clock input
ESD protection up to 6 kV on all USB pins