AR1021-I/SO, Resistive Touch Screen Controller, 10 bit I2C, SPI 4-Wire, 5-Wire, 8-Wire, 20-Pin SOIC
- RS-artikelnummer:
- 177-1836P
- Tillv. art.nr:
- AR1021-I/SO
- Tillverkare / varumärke:
- Microchip
Antal 5 enheter (levereras i ett rör)*
123,65 kr
(exkl. moms)
154,55 kr
(inkl. moms)
GRATIS leverans för online beställningar över 500,00 kr
Tillfälligt slut
- Leverans från den 19 januari 2026
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter | Per enhet |
|---|---|
| 5 + | 24,73 kr |
*vägledande pris
- RS-artikelnummer:
- 177-1836P
- Tillv. art.nr:
- AR1021-I/SO
- Tillverkare / varumärke:
- Microchip
Specifikationer
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla | Attribut | Värde |
|---|---|---|
| Brand | Microchip | |
| Resolution | 10 bit | |
| Interface Type | I2C, SPI | |
| Sensing Technology | Resistive | |
| Sensing Wire Type | 4-Wire, 5-Wire, 8-Wire | |
| Mounting Type | Surface Mount | |
| Package Type | SOIC | |
| Pin Count | 20 | |
| Dimensions | 12.8 x 7.5 x 2.35mm | |
| Length | 12.8mm | |
| Sensor Type | Touch Screen Controllers | |
| Width | 7.5mm | |
| Height | 2.35mm | |
| Maximum Operating Temperature | +85 °C | |
| Minimum Operating Temperature | -40 °C | |
| Välj alla | ||
|---|---|---|
Brand Microchip | ||
Resolution 10 bit | ||
Interface Type I2C, SPI | ||
Sensing Technology Resistive | ||
Sensing Wire Type 4-Wire, 5-Wire, 8-Wire | ||
Mounting Type Surface Mount | ||
Package Type SOIC | ||
Pin Count 20 | ||
Dimensions 12.8 x 7.5 x 2.35mm | ||
Length 12.8mm | ||
Sensor Type Touch Screen Controllers | ||
Width 7.5mm | ||
Height 2.35mm | ||
Maximum Operating Temperature +85 °C | ||
Minimum Operating Temperature -40 °C | ||
The Microchip mTouch™ AR1000 Series Resistive Touch Screen Controller is a complete, easy to integrate, cost-effective and universal touch screen controller chip solution. The AR1000 Series has sophisticated proprietary touch screen decoding algorithms to fully process all touch data and save the host from this overhead. More than the usual “preprocessing” features of other low cost devices, the AR1000 delivers reliable, validated and calibrated touch coordinates. Using its onboard EEPROM, the AR1000 can store and independently apply the calibration to the touch coordinates before sending them to the host.
Additional Features: Supports any manufacturer's 4-, 5-, or 8-wire analog resistive touch screen I2C or SPI communication
1024x1024 resolution
EEPROM calibration retention
Supports any size analog resistive touch screen, 1.5" - 24"
1024x1024 resolution
EEPROM calibration retention
Supports any size analog resistive touch screen, 1.5" - 24"