RS PRO 230V ac, 11.8V ac Toroidal Transformer, 105VA 2 Output
- RS-artikelnummer:
- 173-0244
- Tillverkare / varumärke:
- RS PRO
Antal (1 låda med 14 enheter)*
9 617,566 kr
(exkl. moms)
12 021,954 kr
(inkl. moms)
GRATIS leverans för online beställningar över 500,00 kr
I lager
- Dessutom levereras 420 enhet(er) från den 15 december 2025
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter | Per enhet | Per låda* |
|---|---|---|
| 14 + | 686,969 kr | 9 617,57 kr |
*vägledande pris
- RS-artikelnummer:
- 173-0244
- Tillverkare / varumärke:
- RS PRO
Specifikationer
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla | Attribut | Värde |
|---|---|---|
| Brand | RS PRO | |
| Primary Voltage Rating | 230V ac | |
| Secondary Voltage Rating | 11.8V ac | |
| Power Rating | 105VA | |
| Number of Outputs | 2 | |
| Secondary Current | 8.898A | |
| Height | 46mm | |
| Weight | 1.3kg | |
| Diameter | 93mm | |
| Dimensions | 93 (Dia.) x 46mm | |
| Minimum Operating Frequency | 50Hz | |
| Maximum Operating Frequency | 60Hz | |
| Termination Type | Copper Conductor Termination Wire | |
| Välj alla | ||
|---|---|---|
Brand RS PRO | ||
Primary Voltage Rating 230V ac | ||
Secondary Voltage Rating 11.8V ac | ||
Power Rating 105VA | ||
Number of Outputs 2 | ||
Secondary Current 8.898A | ||
Height 46mm | ||
Weight 1.3kg | ||
Diameter 93mm | ||
Dimensions 93 (Dia.) x 46mm | ||
Minimum Operating Frequency 50Hz | ||
Maximum Operating Frequency 60Hz | ||
Termination Type Copper Conductor Termination Wire | ||
Toroidal open wound low voltage lighting transformer
Single primary230 Vac 50 / 60 Hz winding with integral thermal switch
Thermal switch, rated at 120° ±5°C for 50 and 105VA, 125° ±5°C for 150 and 200VA
Double insulated primary leads
Thermal switch, rated at 120° ±5°C for 50 and 105VA, 125° ±5°C for 150 and 200VA
Double insulated primary leads
Note
Mounting hardware is not supplied, available seperately
Warning
Under no circumstances should both ends of the fixing bolt simultaneously contact the metal chassis or framework as this would create a potentially dangerous 'shorted-turn'.
Approvals
UL506, EN61558
Approvals
UL506, EN61558
