Infineon TD390N18SOFHPSA1, Thyristor Module 1800V, 380A 150mA
- RS-artikelnummer:
- 217-7220
- Tillv. art.nr:
- TD390N18SOFHPSA1
- Tillverkare / varumärke:
- Infineon
Mängdrabatt möjlig
Antal (1 fack med 3 enheter)*
3 437,841 kr
(exkl. moms)
4 297,302 kr
(inkl. moms)
GRATIS leverans för online beställningar över 500,00 kr
Tillfälligt slut
- Leverans från den 06 december 2027
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter | Per enhet | Per Bricka* |
|---|---|---|
| 3 - 3 | 1 145,947 kr | 3 437,84 kr |
| 6 - 6 | 1 088,64 kr | 3 265,92 kr |
| 9 + | 1 019,91 kr | 3 059,73 kr |
*vägledande pris
- RS-artikelnummer:
- 217-7220
- Tillv. art.nr:
- TD390N18SOFHPSA1
- Tillverkare / varumärke:
- Infineon
Specifikationer
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla | Attribut | Värde |
|---|---|---|
| Brand | Infineon | |
| Rated Average On-State Current | 380A | |
| Thyristor Type | Diode | |
| Repetitive Peak Reverse Voltage | 1800V | |
| Maximum Gate Trigger Current | 150mA | |
| Maximum Gate Trigger Voltage | 2V | |
| Maximum Holding Current | 150mA | |
| Pin Count | 7 | |
| Välj alla | ||
|---|---|---|
Brand Infineon | ||
Rated Average On-State Current 380A | ||
Thyristor Type Diode | ||
Repetitive Peak Reverse Voltage 1800V | ||
Maximum Gate Trigger Current 150mA | ||
Maximum Gate Trigger Voltage 2V | ||
Maximum Holding Current 150mA | ||
Pin Count 7 | ||
The Infineon Thyristor/diode is available in 50 mm prime block 1800 V, 390 A module for phase control in solder bond technology. This is the second generation with increase current rating.
Solder bond technology
Industrial standard package
Highest current rating in 50 mm foot print
Cost effective solution for higher competitiveness
Predictably high performance and lifetime due to 100% x-ray monitoring
Solid base plate for fast and easy mounting
Optimized for less performant heat sinks
Industrial standard package
Highest current rating in 50 mm foot print
Cost effective solution for higher competitiveness
Predictably high performance and lifetime due to 100% x-ray monitoring
Solid base plate for fast and easy mounting
Optimized for less performant heat sinks