Littelfuse P0640SCLRP, Thyristor, 500A 2.2mA
- RS-artikelnummer:
- 171-9665
- Tillv. art.nr:
- P0640SCLRP
- Tillverkare / varumärke:
- Littelfuse
Antal (1 förpackning med 5 enheter)*
65,05 kr
(exkl. moms)
81,30 kr
(inkl. moms)
GRATIS leverans för online beställningar över 500,00 kr
Tillfälligt slut
- 2 365 enhet(er) är redo att levereras
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter | Per enhet | Per förpackning* |
|---|---|---|
| 5 + | 13,01 kr | 65,05 kr |
*vägledande pris
- RS-artikelnummer:
- 171-9665
- Tillv. art.nr:
- P0640SCLRP
- Tillverkare / varumärke:
- Littelfuse
Specifikationer
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla | Attribut | Värde |
|---|---|---|
| Brand | Littelfuse | |
| Rated Average On-State Current | 500A | |
| Thyristor Type | SIDACtor | |
| Package Type | DO-214AA | |
| Surge Current Rating | 35A | |
| Mounting Type | Surface Mount | |
| Maximum Gate Trigger Current | 2.2mA | |
| Maximum Gate Trigger Voltage | 4V | |
| Maximum Holding Current | 150mA | |
| Pin Count | 2 | |
| Dimensions | 4.6 x 3.95 x 2.45mm | |
| Off-State Voltage | 58V | |
| Repetitive Peak Off-State Current | 5µA | |
| Maximum Operating Temperature | +150 °C | |
| Minimum Operating Temperature | -40 °C | |
| Välj alla | ||
|---|---|---|
Brand Littelfuse | ||
Rated Average On-State Current 500A | ||
Thyristor Type SIDACtor | ||
Package Type DO-214AA | ||
Surge Current Rating 35A | ||
Mounting Type Surface Mount | ||
Maximum Gate Trigger Current 2.2mA | ||
Maximum Gate Trigger Voltage 4V | ||
Maximum Holding Current 150mA | ||
Pin Count 2 | ||
Dimensions 4.6 x 3.95 x 2.45mm | ||
Off-State Voltage 58V | ||
Repetitive Peak Off-State Current 5µA | ||
Maximum Operating Temperature +150 °C | ||
Minimum Operating Temperature -40 °C | ||
Littelfuse DO-214AA SIDACtor solid state protection devices protect telecommunications equipment such as modems, line cards, fax machines, and other CPE.SIDACtor devices are used to enable equipment to meet various regulatory requirements including GR 1089, ITU K.20, K.21 and K.45, IEC 60950, UL 60950, and TIA/EIA-IS-968 (formerly known as FCC Part 68).
All measurements are made at an ambient temperature of 25°C. Ipp applies to -40°C through +85°C temperature range.
Ipp is a repetitive surge rating and is guaranteed for the life of the product.
Listed SIDACtor® devices are bi-directional. All electrical parameters and surge ratings apply to forward and reverse polarities.
Vdrm is measured at Idrm.
Vs is measured at 100 V/μs.
Special voltage (Vs & Vdrm) and holding current (Ih) requirements are available upon request.
Off-state capacitance is measured at 1 MHz with a 2 V bias and is a typical value.
Ipp is a repetitive surge rating and is guaranteed for the life of the product.
Listed SIDACtor® devices are bi-directional. All electrical parameters and surge ratings apply to forward and reverse polarities.
Vdrm is measured at Idrm.
Vs is measured at 100 V/μs.
Special voltage (Vs & Vdrm) and holding current (Ih) requirements are available upon request.
Off-state capacitance is measured at 1 MHz with a 2 V bias and is a typical value.