Dormer Threading Tap HSS-E 1-Piece 0.7mm Pitch Metric Standard Machine Tap M4 Thread
- RS-artikelnummer:
- 299-9110
- Tillv. art.nr:
- E207-M4
- Tillverkare / varumärke:
- Dormer
Denna bild representerar endast produktgruppen
Antal (1 enhet)*
143,58 kr
(exkl. moms)
179,48 kr
(inkl. moms)
GRATIS leverans för online beställningar över 500,00 kr
I lager
- 18 enhet(er) är redo att levereras
- Plus 5 enhet(er) är redo att levereras från en annan plats
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter | Per enhet |
|---|---|
| 1 + | 143,58 kr |
*vägledande pris
- RS-artikelnummer:
- 299-9110
- Tillv. art.nr:
- E207-M4
- Tillverkare / varumärke:
- Dormer
Specifikationer
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla | Attribut | Värde |
|---|---|---|
| Brand | Dormer | |
| Thread Size | M4 | |
| Set Type | Threading Tap | |
| Type | Spiral Flute | |
| Pitch | 0.7mm | |
| Thread Standard | Metric | |
| Thread Direction | Right Hand | |
| Number of Pieces | 1 | |
| Overall Length | 63 mm | |
| Material | HSS-E | |
| Hand/Machine Tap | Machine Tap | |
| Shank Diameter | 4.5 mm | |
| Välj alla | ||
|---|---|---|
Brand Dormer | ||
Thread Size M4 | ||
Set Type Threading Tap | ||
Type Spiral Flute | ||
Pitch 0.7mm | ||
Thread Standard Metric | ||
Thread Direction Right Hand | ||
Number of Pieces 1 | ||
Overall Length 63 mm | ||
Material HSS-E | ||
Hand/Machine Tap Machine Tap | ||
Shank Diameter 4.5 mm | ||
RoHS-status: Undantagen
- COO (Country of Origin):
- IT
E207 Metric Pitch Spiral Cobalt Machine Tap Bits
A range of metric pitch spiral cobalt machine tap bits. These tap bits meet stringent high-production machining demands due to significant resistance to wear and high temperatures.
These tap bits have a short 2-threadentry.
The tolerance class of these tap bits is 6H, the cutting angle is 12°, the spiral rake angle is 15° right and the shank is reinforced.
These top quality tap bits are ideal for operations in blind holes on materials with a tensile strength of approximately 750 N/mm2.
These tap bits have a short 2-threadentry.
The tolerance class of these tap bits is 6H, the cutting angle is 12°, the spiral rake angle is 15° right and the shank is reinforced.
These top quality tap bits are ideal for operations in blind holes on materials with a tensile strength of approximately 750 N/mm2.
Standard: DIN 371
Rolled Flute Taps
Bright finish fluteless taps; for use on copper, aluminium, magnesium, brass, zinc etc.
Flash chrome finish fluteless taps; for use on steel up to 850N/mm2 tensile strength, free matching and austenitic stainless steel
Made to ISO529 standard for tapping blind and through holes in a wide range of ductile materials
Smooth non-cutting action produces greater thread formed strength, higher life expectancy and increased tapping speeds especially where excessive tension occurs
Flash chrome finish fluteless taps; for use on steel up to 850N/mm2 tensile strength, free matching and austenitic stainless steel
Made to ISO529 standard for tapping blind and through holes in a wide range of ductile materials
Smooth non-cutting action produces greater thread formed strength, higher life expectancy and increased tapping speeds especially where excessive tension occurs
relaterade länkar
- Dormer Threading Tap HSS 1-Piece 0.7mm Pitch Metric Standard Machine Tap M4 Thread
- Dormer Threading Tap HSS-XS1 1-Piece 0.7mm Pitch Metric Standard Machine Tap M4 Thread
- Dormer Threading Tap HSS-E 1-Piece 0.7mm Pitch Metric Standard Machine Tap M4 Thread
- Dormer Threading Tap HSS-E-PM 1-Piece 0.7mm Pitch Metric Standard Machine Tap M4 Thread
- Dormer Threading Tap HSS 1-Piece 0.7mm Pitch Metric Standard M4 Thread
- Dormer Threading Tap HSS 0.7mm Pitch Metric Coarse Standard M4 Thread
- Dormer Threading Tap HSS-E-PM 0.7mm Pitch Metric Standard M4 Thread
- Dormer Threading Tap Carbide 1-Piece 0.7mm Pitch Metric Standard Machine Tap M4 Thread