Senaste sökningar

    TE Connectivity Temperature & Humidity Sensor, Digital Output, Surface Mount, Serial-I2C, ±2%RH, 6 Pins

    RS-artikelnummer:
    893-7146P
    Tillv. art.nr:
    HPP845E031R5
    Tillverkare / varumärke:
    TE Connectivity
    TE Connectivity
    Se kategorien
    4908 I lager för leverans inom 1 arbetsdagar
    Add to Basket
    Enheter

    Lagt till varukorgen

    Pris (ex. moms) Each (Supplied on a Reel) Quantities below 150 on continuous strip

    45,22 kr

    (exkl. moms)

    56,52 kr

    (inkl. moms)

    EnheterPer unit
    10 - 2445,22 kr
    25 - 4936,68 kr
    50 - 9932,31 kr
    100 +31,46 kr
    Förpackningsalternativ:
    RS-artikelnummer:
    893-7146P
    Tillv. art.nr:
    HPP845E031R5
    Tillverkare / varumärke:
    TE Connectivity

    Lagstiftning och ursprungsland


    Produktdetaljer

    TE Connectivity HTU21D(F) Series Digital Humidity Sensors with Temperature Output


    The HTU21D(F) is a digital humidity sensor with temperature output by MEAS. Setting new standards in terms of size and intelligence, it is embedded in a reflow solderable Dual Flat No leads (DFN) package with a small 3 x 3 x 0.9 mm footprint. This sensor provides calibrated, linearized signals in digital, I²C format.

    HTU21D(F) digital humidity sensors are dedicated humidity and temperature plug and play transducers for OEM applications where reliable and accurate measurements are needed. Direct interface with a micro-controller is made possible with the module for humidity and temperature digital outputs. These low power sensors are designed for high volume and cost sensitive applications with tight space constraints.

    Every sensor is individually calibrated and tested. Lot identification is printed on the sensor and an electronic identification code is stored on the chip – which can be read out by command. Low battery can be detected and a checksum improves communication reliability. The resolution of these digital humidity sensors can be changed by command (8/12bit up to 12/14bit for RH/T).

    With MEAS’ improvements and miniaturization of this sensor, the performance-to-price ratio has been improved – and eventually, any device should benefit from its cutting edge energy saving operation mode.


    • Full interchangeability with no calibration required in standard conditions
    • Instantaneous desaturation after long periods in saturation phase
    • Compatible with automatized assembly processes, including Pb free and reflow processes
    • Individual marking for compliance to stringent traceability requirements


    Applications


    • Automotive: defogging, HVAC
    • Printers
    • Medical
    • Home Appliance
    • Humidifier



    Temperature & Humidity Sensors, TE Connectivity


    Specifikationer

    AttributeValue
    Sensor FunctionTemperature & Humidity
    Output TypeDigital
    Interface TypeSerial-I2C
    Accuracy±2%RH
    Mounting TypeSurface Mount
    Pin Count6
    Operating Temperature Range-40 to +125 °C
    Minimum Operating Temperature-40 °C
    Maximum Operating Temperature+125 °C
    Minimum Operating Supply Voltage1.5 V
    Maximum Operating Supply Voltage3.6 V
    Package TypeDFN
    Length3mm
    Height0.9mm
    Width3mm
    Resolution0.7 %RH
    Dimensions3 x 3 x 0.9mm
    4908 I lager för leverans inom 1 arbetsdagar
    Add to Basket
    Enheter

    Lagt till varukorgen

    Pris (ex. moms) Each (Supplied on a Reel) Quantities below 150 on continuous strip

    45,22 kr

    (exkl. moms)

    56,52 kr

    (inkl. moms)

    EnheterPer unit
    10 - 2445,22 kr
    25 - 4936,68 kr
    50 - 9932,31 kr
    100 +31,46 kr
    Förpackningsalternativ: