Honeywell HIH-4000 Series Humidity Sensor, Analogue Output, Through Hole Mount, Analogue, ±3.5%RH, 3 Pins

RS-artikelnummer:: 548-4295
Tillv. art.nr:: HIH-4000-003
Tillverkare / varumärke:: Honeywell

Honeywell HIH-4000 Series Humidity Sensor, Analogue Output, Through Hole Mount, Analogue, ±3.5%RH, 3 Pins

För närvarande inte tillgänglig

Vi vet inte om den här artikeln kommer tillbaka i lager, RS har för avsikt att ta bort den från vårt utbud snart.

RS-artikelnummer:: 548-4295
Tillv. art.nr:: HIH-4000-003
Tillverkare / varumärke:: Honeywell

HIH-4000/4020/4021 Series Humidity Sensors, Honeywell

The HIH-4000 series has been specifically designed for use in high volume OEM (Original Equipment Manufacturer) applications. These sensors utilise a near linear voltage output making direct input to a controller or other devices possible. They are ideally suited for low drain, battery operated systems with a typical current draw of only 200 μA. Potential Applications:Refrigeration equipmentHVAC equipmentMedical equipmentDryingMeteorologyBattery-powered systemsOEM assemblies

Features:Moulded thermoset plastic housingNear linear voltage output vs %RHLaser-trimmed interchangeabilityEnhanced accuracy, fast responseFast response timeStable, low drift performanceChemically resistant

Honeywell Humidity Sensor, -40 to +85°C, ±3.5% Accuracy - HIH-4000 Series - HIH-4000-003

Choose this humidity sensor from Honeywell to check the concentration of moisture in your environment. Its analogue output provides RH (relative humidity) readings with an accuracy of ±3.5%, ensuring precise data. The component's broad operating humidity range of 0 to 100%RH makes it suitable for use in dry and wet environments. Thanks to its low current draw of 200μA, the sensor is suitable for use in situations where there are limitations on power usage, such as in battery-powered applications.

Features & Benefits

• Solderable SIP (single in-line package) design for ease of installation
• Layered thermoset plastic housing for protection against impact and heat
• Wide operating temperature range between -40°C and +85°C for use in harsh environments
• Quick response time of 5s to ensure fast results

Applications

• Heating and ventilation systems
• OEM (original equipment manufacturer) sector
• Haulage and logistics industries

Where should I place this sensor during installation?

For best results, position the sensor's face towards the atmosphere you want to monitor. Ensure that the sensor is kept away from harsh light during use.

Temperature & Humidity Sensors, Honeywell

Attribute	Value
Sensor Function	Humidity Sensor
Output Type	Analogue
Interface Type	Analogue
Accuracy	±3.5%RH
Mounting Type	Through Hole
Pin Count	3
Operating Temperature Range	-40 to +85 °C
Minimum Operating Temperature	-40 °C
Maximum Operating Temperature	+85 °C
Minimum Operating Supply Voltage	4 V
Maximum Operating Supply Voltage	5.8 V
Package Type	SIP
Length	21.66mm
Series	HIH-4000
Height	2.03mm
Width	4.27mm
Dimensions	21.66 x 4.27 x 2.03mm