STMicroelectronics Switching Regulator, Surface Mount, 3.3V Output Voltage, 60V dc Input Voltage, 300mA Output Current,

Se alla Switching Regulators
Mängdrabatt möjlig

Antal 50 enheter (levereras på en kontinuerlig remsa)*

833,30 kr

(exkl. moms)

1 041,60 kr

(inkl. moms)

Add to Basket
välj eller skriv kvantitet
Tillfälligt slut
  • Leverans från den 01 juni 2026
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter
Per enhet
50 - 9516,666 kr
100 - 24512,052 kr
250 +11,738 kr

*vägledande pris

Förpackningsalternativ:
RS-artikelnummer:
210-8280P
Tillv. art.nr:
L7983PU33R
Tillverkare / varumärke:
STMicroelectronics
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla

Brand

STMicroelectronics

Output Voltage

3.3V

Output Current

300mA

Input Voltage

60V dc

Mounting Type

Surface Mount

Number of Outputs

1

Package

DFN

The L7983 device is a step-down monolithic switching regulator able to deliver up to 300 mA DC based on peak current mode architecture.

The output voltage adjustability ranges from 0.85 V to VIN. The wide input voltage range and adjustable UVLO threshold meet the specification for the 12 V, 24 V and 48 V industrial bus standards.

The “Low Consumption Mode” (LCM) is designed for applications active during idle mode, so it maximizes the efficiency at light load with controlled output voltage ripple. The “Low Noise Mode” (LNM) makes the switching frequency constant overload current range, meeting the low noise application specification. The L7983 supports dynamic LCM to LNM transition.

The soft-start time is internally fixed and the output voltage supervisor manages the reset phase for any digital load (microcontroller, FPGA, etc.).

The internal compensation network features high noise immunity, simple design and saves on the component cost.

The RST open collector output can also implement output voltage sequencing during the power-up phase.

The synchronous rectification, designed for high efficiency at medium - heavy load, and the high switching frequency capability make the size of the application compact.

Pulse-by-pulse current sensing on both power elements implements an effective constant current protection.

  • 3.5 V to 60 V operating input voltage
  • Fixed output voltage (3.3 V and 5 V) or adjustable from 0.85 V to VIN
  • 300 mA DC output current
  • Dynamic low consumption mode to low noise mode selection
  • 10 µA operating quiescent current (L7983PU33R, VIN > 24 V, LCM)
  • 2.3 µA shutdown current
  • 200 kHz to 2.2 MHz programmable switching frequency
  • Optional spread spectrum (dithering)
  • Internal soft-start
  • Enable / adjustable UVLO threshold
  • Synchronization to external clock
  • Internal compensation network
  • Internal current limiting
  • Overvoltage protection
  • Output voltage sequencing
  • Thermal shutdown

relaterade länkar