Murata Power Solutions Non-Isolated DC-DC Converter, Through Hole, 12V dc Output Voltage, 24V dc Input Voltage, 1A

Se alla Switching Regulators
Inte tillgänglig
RS kommer inte längre att lagerföra denna produkt.
Förpackningsalternativ:
RS-artikelnummer:
173-6951
Tillv. art.nr:
OKI-78SR-12/1.0-W36E-C
Tillverkare / varumärke:
Murata Power Solutions
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla

Brand

Murata Power Solutions

Output Voltage

12V dc

Output Current

1A

Input Voltage

24V dc

Mounting Type

Through Hole

Number of Outputs

1

Package

TO-220

Power Rating

12W

Efficiency

95.3%

Ripple And Noise

75mV Pk-Pk

Minimum Temperature

-40°C

Maximum Temperature

+85°C

Series

OKI-78SR

Line Regulation

±0.25%

Load Regulation

±0.25%

Length

11.9mm

Maximum Input Current

530mA

Width

10mm

Depth

17.6mm

Allowed Circuit Configurations

Parallel

Protection Features

Short Circuit Protection

Switching Frequency Range

500kHz

Weight

4.5g

MTBF

78700000h

Rated Output Power

12W

Power Signal Conversion Type

DC-DC

COO (Country of Origin):
CN

Murata Power Solutions Non-Isolated DC-DC Converter


The Murata power solutions non-isolated DC-DC converter is a switching regulator used for the embedded application. It has three nominal output voltage terminals, 12VDC and up to 1.5A as the maximum output. Based on fixed frequency, the high efficiency stands for very low heat and low electrical noise, requiring no external component. The fixed single output converters provide both tight regulation and high efficiency directly at power usage site and are direct plug-in instead of linear regulators, eliminating the need for an extra outside component.

Features and Benefits


• High efficiency with no external components
• Outstanding thermal derating performance
• Short circuit protection
• Vertical SIP or horizontal mount, small footprint, in an encapsulated package

Applications


• Control boxes
• ITE commercials

Certifications


• UL approved

relaterade länkar