Omron G3RV-SR Series Solid State Interface Relay, 230 V ac Control, 3 A Load, DIN Rail Mount

Se kategorien
Inte tillgänglig
RS kommer inte längre att lagerföra denna produkt.

Alternativ

Denna produkt är för närvarande inte tillgänglig. Vi rekommenderar denna produkt istället.

presentation
Omron G3RV-ST Series Solid State Interface Relay, 230 V ac Control, 3 A Load, DIN Rail Mount
RS-artikelnummer
271-1898

Varje

632,77 kr

(exkl. moms)

790,96 kr

(inkl. moms)

RS-artikelnummer:
111-3024
Tillv. art.nr:
G3RV-SR700-D AC230
Tillverkare / varumärke:
Omron
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla

Brand

Omron

Maximum Control Voltage

230 V ac

Maximum Load Current

3 A

Mounting Type

DIN Rail

Maximum Load Voltage

26.4 V dc

Control Voltage Range

Maximum of 230 V ac

Switching Type

AC/DC

Contact Configuration

SPST

Load Voltage Range

3 → 26.4V dc

Minimum Load Voltage

3 V dc

Terminal Type

Screw

Number of Poles

1

Height

90mm

Length

6.2mm

Series

G3RV-SR

Minimum Load Current

100 μA

Depth

78mm

Output Device

MOSFET

Standards Met

CE, CULus, TUV Certification

Off State Leakage Current

10 μA

Maximum Turn On Time

6 ms

Dimensions

6.2 x 78 x 90mm

Special Features

High-Speed Opening and Closing SSR, Lower Profile than Conventional Products

Operating Temperature Range

-30 → +55°C

Manufacturer Part No.

G3RV-SR700-D AC230

COO (Country of Origin):
JP

G3RV-SR Slim I/O Solid State Relay


Omron G3RV-SR slim I/O solid state relays are part of the Value Design for Panel range from Omron that takes control panel design and manufacturing to a new level. The G3RV-SR relays allow installation with either top or bottom facing up for a flexible panel design. This flexible design allows efficient wiring inside panels. Push-In Plus terminal blocks are used to save wiring work in comparison with conventional screw terminals.

High frequency
High-speed opening and closing
Switching capacity up to 3 A (DC), and 2 A (AC).
LED operating status

G3RV-SR700-D AC230 – I/O Low Profile SSR - Solid State Relay 6.2 mm Wide.


This I/O SSR-Solid state relay has a lower profile up to 25% of other standard SSR allowing further downsizing of the control panel. An optimal slim design relay that includes high frequency and high speed opening and closing of the SSR –solid state relay.

Features and Benefits G3RV-SR700-D AC230 I/O Slim SSR – Solid State Relay.


• Screw terminal.
• 60% Reduced wiring time.
• DC Applicable output load.
• Rated input voltage 230 V ac.
• Slim compact design.
• DC output – MOS FET.
• High frequency.
• High speed opening and closing.
• Easy wiring.

SSR – Solid State Relay Input Rating at ambient 25°C.


• Rated current AC – 7.5 mA 50 Hz, 8.8 mA 60 Hz.
• Must operate voltage 207 V max.
• Must release voltage 1 V min.
• Input voltage ±10% of rated voltage.

SSR – Solid State Relay Output.


• Rated load voltage 5 to 24 V dc.
• Load voltage range 3 to 26.4 V dc.
• 100 μA to 3 A at an ambient 25°C.
• Inrush current resistance 30 A, 60 hZ, 1 cycle.
• Applicable load capacity 72 W, output voltage 24 V dc.

Additional Features of G3RV-SR700-D AC230 SSR – Solid State Relay.


• 6 ms max.
• Release time 60 ms max.
• Output ON resistance 0.3 Ω max at 24 v dc.
• Leaked current 10 μA max at 24 V dc.
• Vibration resistance – malfunction 10 to 55 to 10 Hz double amplitude.
• Shock resistance 300 m/s².
• Ambient operating temperature -30°C to +55°C.
• Relay weight 38 g.
• IP 20
• Load category DC-12.
• Rated insulation voltage 240 V.

Suitable SSR – Solid State DIN Rails.


• Part number PFP-100N – 1 m DIN relay, Stock number 8278403.
• Part number PFP-50N – 0.5 m DIN relay, Stock number 8278400.

Suitable End Plate for the SSR –Solid State Relay.


• Part number PFP-M, stock number 8278419.

Suitable Spacer Plate for the SSR- Solid State Relay.


• Part number PFP-S, Stock number 8278412.

Standards

UL 508, E64562. CE, TUV.


Zero Voltage Relays

Note

Temperature can affect current rating; please consult the data sheet for potential derating.

relaterade länkar