Hydralectric Solenoid Valve 72003, 2 port , NC, 12 V dc, 1/2in

  • RS-artikelnummer 342-023
  • Tillv. art.nr 72003
  • Tillverkare / varumärke Hydralectric
Lagstiftning och ursprungsland

Two-way Solenoid Valves

Two-way solenoid diaphragm operated, normally closed valves are ideal for controlling water pressure 0.2 to 10 bar. The valve is continuously rated when the fluid temperature is below 25°C, the ambient temperature is below 60°C and the flow rate is above 5 L/min. A duty cycle of 40% is required for fluid temperatures up to 90°C

Features and Benefits

Application Information

• Coil can be located in any one of eight positions
• Maximum flow rate: 17 L/min
• 0.2 bar to 10 bar pressure range
• Power consumption: 4 W
• Nylon 6 body with 1/2 inch BSP ports (can be base mounted)
• 1/4 inch spade coil terminals
• In the 12Vdc/24 V/ac version, the solenoid coil is wound so either voltage can be passed through it

Typically used in hand washers, refrigeration equipment and automatic tap systems.

Eight position coil location

Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left-hand side of the diagram describes the valves operation when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and is described on the right-hand side of the diagram. The 3 / 2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2 / 2-way valves as two ways. The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications indicates the appropriate connections and pressure capabilities when an alternative circuit function is required.

Attribute Value
Supply Voltage 12 V dc
Number of Ports 2
Operation Direct
Connection 1/2 in BSP
Connection Size 1/2in
Default Valve Position NC
Suitable Applications Water
Type 2/2
Body Material Polyamide
Maximum Working Pressure 10 bar
Operating Temperature Range Maximum of +60 °C
Maximum Operating Temperature +60°C
Connection Gender Male
Thread Standard or Connection Type BSP
653 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
193,38 kr
(exkl. moms)
241,72 kr
(inkl. moms)
Per unit
1 - 4
193,38 kr
5 +
187,44 kr
Relaterte Produkter
Solenoid valves with pivoted armatures. Lockable manual over-ride3-pin ...
Solenoid valves with pivoted armatures. Lockable manual over-ride3-pin DIN connector rated to IP65 can be positioned through 360° in 90° incrementsDuty cycle intermittent operation 40% 30 min8W nominal coil powerPower consumption 30VA (in-rush), 15 VA/8W (hold) a.c, A 8W d.c.Zero ...
Two-way, direct operated coaxial valves for high flow/high ...
Two-way, direct operated coaxial valves for high flow/high pressure fluids, zero bar minimum operating pressure, normally closed with threaded port connection. Brass bodyPressure not required for operation Compatible with viscous or abrasive gases and liquidsMaximum viscosity 500cSt (mm²/s)Valves satisfy article ...
Diaphragm valves for partially aggressive gaseous and liquid ...
Diaphragm valves for partially aggressive gaseous and liquid mediaSuitable for vacuumFor systems with low or fluctuating pressure conditionsDefined flow directionValve works without minimum pressure differentialElectromagnetically actuatedWith forced liftClosing dampingWithout tool, interchangeable magnet (Click-on®).
Parker 2-way solenoid valves are used in a ...
Parker 2-way solenoid valves are used in a wide variety of applications with or without pressure differential. Ideally suited for air, liquids and gases, these valves are available with a brass or stainless steel body. CompressorsWater dispensing & purificationCooling systemsMedical ...