- RS-artikelnummer:
- 872-6283
- Tillverkare / varumärke:
- RS PRO
Se alla Solder Sleeves
140 I lager för avsändande samma dag
Pris (ex. moms) 1 Bag of 100
629,27 kr
(exkl. moms)
786,59 kr
(inkl. moms)
Påse(ar) | Per Bag | Per unit* |
1 - 14 | 629,27 kr | 6,293 kr |
15 - 49 | 597,76 kr | 5,978 kr |
50 + | 578,94 kr | 5,789 kr |
- RS-artikelnummer:
- 872-6283
- Tillverkare / varumärke:
- RS PRO
Datablad
Lagstiftning och ursprungsland
- COO (Country of Origin):
- CN
Produktdetaljer
RS PRO Blue Solder Sleeve 1.4 to 2.7 mm
RS PRO solder sleeves are an easy way to join wires together. They save you both time and labour when compared hand-soldering, crimping or other conventional methods of wire and cable termination.
These solder sleeves come pre-assembled with an outer heat-shrinkable jacket, a pre-fluxed solder and blue-coloured hot-melt glue at either end. The solder's flux makes it easier for the solder to bond to the metal of the wires and the hot-melt glue provides moisture resistance. Simply thread the sleeve over one wire, place the other wire alongside it, move the sleeve back over the two wires and seal with a heat gun. The solder melts to form an effective electrical connection. The sleeve will shrink, insulating and taking the strain off the connection, and the glue will melt.
After heating, the connection can easily be inspected through the transparent sleeve. Use these solder sleeves in workshops or industrial environments at temperatures ranging from -55°C to +125°C.
These solder sleeves come pre-assembled with an outer heat-shrinkable jacket, a pre-fluxed solder and blue-coloured hot-melt glue at either end. The solder's flux makes it easier for the solder to bond to the metal of the wires and the hot-melt glue provides moisture resistance. Simply thread the sleeve over one wire, place the other wire alongside it, move the sleeve back over the two wires and seal with a heat gun. The solder melts to form an effective electrical connection. The sleeve will shrink, insulating and taking the strain off the connection, and the glue will melt.
After heating, the connection can easily be inspected through the transparent sleeve. Use these solder sleeves in workshops or industrial environments at temperatures ranging from -55°C to +125°C.
Features and Benefits
Low-density polyethylene solder sleeve
Minimum cable diameter of 1.4 mm
Maximum cable diameter of 2.7 mm
Length of 24.5 mm
Dielectric strength of 1 kV
Operating temperature range from -55°C to +125°C
Shrink and solder melt temperature of +138°C
Blue-coloured hot-melt glue
RoHS (Restriction of Hazardous Substances) compliant
Minimum cable diameter of 1.4 mm
Maximum cable diameter of 2.7 mm
Length of 24.5 mm
Dielectric strength of 1 kV
Operating temperature range from -55°C to +125°C
Shrink and solder melt temperature of +138°C
Blue-coloured hot-melt glue
RoHS (Restriction of Hazardous Substances) compliant
RS PRO
RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards
theyre only given the RS PRO Seal of Approval if were confident of their exceptional quality, which means you can be confident too.
Specifikationer
Attribute | Value |
---|---|
Minimum Cable Diameter | 1.4mm |
Maximum Cable Diameter | 2.7mm |
Sleeve Length | 24.5mm |
Material | Low-Density Polyethylene |
Dielectric Strength | 1kV |
Minimum Operating Temperature | -55°C |
Maximum Operating Temperature | +125°C |
Quantity | 1 |
Colour | Blue |
Shrink Temperature | >115°C |
Standards Met | RoHS Compliant |
Series | GAST |