Martindale, Model CP-301 Socket Tester 16A 110 V CAT II
- RS-artikelnummer:
- 253-541
- Tillv. art.nr:
- CP301
- Tillverkare / varumärke:
- Martindale
Antal (1 enhet)*
820,32 kr
(exkl. moms)
1 025,40 kr
(inkl. moms)
GRATIS leverans för online beställningar över 500,00 kr
I lager
- Dessutom levereras 32 enhet(er) från den 12 januari 2026
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter | Per enhet |
|---|---|
| 1 + | 820,32 kr |
*vägledande pris
Kalibrerade alternativ:
Varje
1 557,32 kr
(exkl. moms)
1 946,65 kr
(inkl. moms)
- RS-artikelnummer:
- 253-541
- Tillv. art.nr:
- CP301
- Tillverkare / varumärke:
- Martindale
Specifikationer
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla | Attribut | Värde |
|---|---|---|
| Brand | Martindale | |
| Product Type | Socket Tester | |
| Voltage | 110 V | |
| Current | 16A | |
| Number of Pins | 3 | |
| Wiring Check | Yes | |
| Power Source | Mains | |
| Minimum Operating Temperature | -10°C | |
| Maximum Operating Temperature | 40°C | |
| Model Number | CP-301 | |
| Width | 47 mm | |
| Length | 65mm | |
| Height | 65mm | |
| Standards/Approvals | BS EN 6132622, CE, BS EN 610101, BS EN 613261, CAT III 300V, BS 4343 | |
| Plug Type | BS4343 | |
| Weight | 180g | |
| Safety Category Level | CAT II | |
| Safety Category Voltage | 150V | |
| Välj alla | ||
|---|---|---|
Brand Martindale | ||
Product Type Socket Tester | ||
Voltage 110 V | ||
Current 16A | ||
Number of Pins 3 | ||
Wiring Check Yes | ||
Power Source Mains | ||
Minimum Operating Temperature -10°C | ||
Maximum Operating Temperature 40°C | ||
Model Number CP-301 | ||
Width 47 mm | ||
Length 65mm | ||
Height 65mm | ||
Standards/Approvals BS EN 6132622, CE, BS EN 610101, BS EN 613261, CAT III 300V, BS 4343 | ||
Plug Type BS4343 | ||
Weight 180g | ||
Safety Category Level CAT II | ||
Safety Category Voltage 150V | ||
RoHS-status: Inte relevant
16A Industrial Check Plugs Martindale CP201 & CP301
The simplest, safest and most efficient method of checking 16A sockets in factory or on-site installations. Shows similar fail-safe indications to the Martindale classic check plug.
The simplest, safest and most efficient method of checking 16A 2P+E BS4343 sockets
Intended for use on industrial 240V sockets whilst the 110V check plug will check centre tapped 110V supplies
Both the 110V and the 240V Check Plug are fitted with a standard BS4343 16A plug
Fault conditions displayed on three neons on the 240V checker and on three LEDs on the 110V unit
Both Check Plugs list fault conditions and their associated indications on the face of the unit
Warning
Although a 110V Check Plug will show the correct connection of the centre tapped line, it cannot verify that an earth is connected.
relaterade länkar
- Martindale, Model CP-301 Socket Tester 30mA 110V ac CAT II 150 V RS Calibration
- Martindale Socket Tester 16/32A 110V ac CAT II 150 V
- Martindale, Model CP-501 Socket Tester 13A 200 → 250V ac CAT II 300 V
- Martindale Socket Tester 16/32A 110V ac Cat II 150 V RS Calibration
- Martindale, Model CP-501 Socket Tester 13A 200 → 250V ac CAT II 300 V RS Calibration
- Martindale, Model CP-201 Socket Tester 16A 230V ac CAT III 300 V
- Martindale, Model CP-201 Socket Tester 16A 230V ac CAT III 300 V RS Calibration
- Martindale, Model EZ664 Socket Tester 30mA 230V CAT III 300V