FUSS-EMV 3AFS400 Series 3 x 500 V ac 180A Line Reactor

  • RS-artikelnummer 866-1855
  • Tillv. art.nr 3AFS400-180
  • Tillverkare / varumärke FUSS-EMV
Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
Produktdetaljer

3-Phase Sinusoidal Filter, 3AFS400 Series

The 3AFS400 Series of filters improves drive systems by increasing the applicable motor cable length and reduces motor noise. These filters can also protect and increase engine lifetime.

Features & Benefits:

Sinusoidal filters 3AFS400 change the output PWM voltage of frequency converters to a sinusoidal line-to-line voltage.
Sinusoidal filters enable the operation with very long motor lines. Shielded lines may be at least 300 m long and with a tuned switching frequency even longer.
The use of unshielded motor lines is not recommended in industrial applications. In this case an all-pole sinusoidal filter is available in combination with a common-code switching frequency filter 3ACMF for the generation of true sinusoidal power supplies. If the switching frequency is known a customized sinusoidal filter, to reach a bigger length, could be created. Typical applications are noise reduced drives and the protection of sensible motors.

Note

Qualified for a motor speed of 120 Hz

Specifikationer
Attribute Value
Maximum Voltage Rating 3 x 500 V ac
Series 3AFS400
Maximum Current Rating 180A
Dimensions 480 x 300 x 440mm
Depth 300mm
Height 440mm
Length 480mm
Maximum Operating Temperature +40°C
I lager för leverans inom 2 arbetsdagar
Pris (ex. moms) Each
28 400,77 kr
(exkl. moms)
35 500,96 kr
(inkl. moms)
Enheter
Per unit
1 +
28 400,77 kr
Nästa dag-leverans inte möjlig
Related Products
All pole sine filters achieve excellent EMC properties, ...
Description:
All pole sine filters achieve excellent EMC properties, since both conducted and radiated disturbances are minimised. The usage is recommended for filtering the drives of for example elevators, fans, pumps and compressors, which are located in sensitive environments. This includes ...
The Common Mode Filter in Combination with the ...
Description:
The Common Mode Filter in Combination with the Sine Filter 3AFS400 (Differential Mode) results in an All-Pole Sine-Filter. The filter allows frequencies up to 1000 Hz and filters the switching and higher frequencies. All models are highly reliable and excellent ...
FUSS du/dt-Filters are used to reduce the voltage ...
Description:
FUSS du/dt-Filters are used to reduce the voltage slew rate at the output of frequency converters to values below 500 V/μs. du/dt-filters are simple and cheap devices to optimise in a simple drive system. du/dt filters are damping the rate ...
Schaffner FN5040 / FN5045 series output filters eliminate ...
Description:
Schaffner FN5040 / FN5045 series output filters eliminate premature motor damage caused by high DV/DT, overvoltages, cable ringing, motor overheating and eddy current losses. The output filter converts regular PWM output voltage of motor drives into a smooth sine wave ...