PR Electronics 3100 Series Loop Powered Isolator, Current Input, Current Output, ATEX

RS-artikelnummer:: 796-7105
Tillv. art.nr:: 3185A2
Tillverkare / varumärke:: PR Electronics

PR Electronics 3100 Series Loop Powered Isolator, Current Input, Current Output, ATEX

Antal (1 enhet)*

1 916,25 kr

(exkl. moms)

2 395,31 kr

(inkl. moms)

GRATIS leverans för online beställningar över 500,00 kr

I lager

12 enhet(er) är redo att levereras
Plus 10 enhet(er) är redo att levereras från en annan plats
Dessutom levereras 18 enhet(er) från den 22 december 2025

Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"

Enheter	Per enhet
1 +	1 916,25 kr

*vägledande pris

RS-artikelnummer:: 796-7105
Tillv. art.nr:: 3185A2
Tillverkare / varumärke:: PR Electronics

Specifikationer

Datablad

Lagstiftning och ursprungsland

Produktdetaljer

Hitta liknande produkter genom att välja ett eller flera attribut.

Välj alla	Attribut	Värde
	Brand	PR Electronics
	Module Type	Loop Powered Isolator
	Input Signal Type	Current
	Output Signal Type	Current
	Input Range	0 → 23mA
	Output Range	0 → 23mA
	Hazardous Area Certification	ATEX
	Mounting Type	DIN Rail Mount
	Operating Temperature Range	-25 → +70°C
	Series	3100
	Minimum Operating Temperature	-25°C
	Maximum Operating Temperature	+70°C

	Välj alla
	Brand PR Electronics
	Module Type Loop Powered Isolator
	Input Signal Type Current
	Output Signal Type Current
	Input Range 0 → 23mA
	Output Range 0 → 23mA
	Hazardous Area Certification ATEX
	Mounting Type DIN Rail Mount
	Operating Temperature Range -25 → +70°C
	Series 3100
	Minimum Operating Temperature -25°C
	Maximum Operating Temperature +70°C

Logga in för att ladda ner CAD-modeller

COO (Country of Origin):: DK

PR Electronics 3185 Loop Powered Isolator

3185 type is a 1 or 2 channel input loop powered isolator. Inputs and outputs are floating and galvanically separated. The converter eliminates ground loops and can be used for measuring floating signals. Also provides surge suppression and protects control systems from transients and noise.

Features and Benefits

• High basic 0.05% accuracy in all available signal ranges

• 2.5 kVAC isolation and have excellent noise immunity

• NAMUR NE21 burst A criteria

• Transmits rapid changes in process measurements to PLC/DCS for fast and accurate monitoring of critical signals

• Low temperature coefficient better than 0.01% / °C in a wide -25 to +70°C ambient temperature range for precise measurements

• Long term accuracy better than 0.1% / 3 years with no need for re-calibration

• Installation in ATEX Ex zone 2 / IECEx Zone 2 / FM division 2

DIP-switch programming

Re-calibration is not needed after changing the DIP-switch range settings. Just change the DIP-switch, cycle the power to the unit and obtain the new, pre-calibrated I/O range. HART programming is enabled for selected devices.

Mounting

Devices can be mounted both vertically and horizontally with no air gap separation required. The devices snap onto a power rail or DIN rail and are easily detached by lifting the bottom lock.

High level of isolation

Safe galvanic isolation of 2.5 kVAC provides high noise immunity and prevents ground loops for accurate delivery of the process signal to your control system.

Device status indicators

A front LED indicates device status, e.g. an error in the set-up, sensor or hardware.

Over voltage- / polarity protection

All terminals can withstand up to ±31.2 VDC and are protected against incorrect supply wiring to ensure safe, error-free installation.

PR Electronics DIN Rail Mounting