SKF TPE Seal, 50mm ID, 75.5mm OD, 12.5mm
- RS-artikelnummer:
- 506-684
- Tillv. art.nr:
- TSN511L
- Tillverkare / varumärke:
- SKF
Denna bild representerar endast produktgruppen
Mängdrabatt möjlig
Antal (1 enhet)*
245,83 kr
(exkl. moms)
307,29 kr
(inkl. moms)
GRATIS leverans för online beställningar över 500,00 kr
Tillfälligt slut
- 12 enhet(er) levereras från den 12 januari 2026
- Dessutom levereras 12 enhet(er) från den 09 februari 2026
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter | Per enhet |
|---|---|
| 1 - 4 | 245,83 kr |
| 5 - 9 | 236,10 kr |
| 10 - 24 | 231,06 kr |
| 25 + | 226,24 kr |
*vägledande pris
- RS-artikelnummer:
- 506-684
- Tillv. art.nr:
- TSN511L
- Tillverkare / varumärke:
- SKF
Specifikationer
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla | Attribut | Värde |
|---|---|---|
| Brand | SKF | |
| Inside Diameter | 50mm | |
| Outside Diameter | 75.5mm | |
| Seal Type | Four-Lip Seal | |
| Thickness | 12.5mm | |
| Seal Material | TPE | |
| Välj alla | ||
|---|---|---|
Brand SKF | ||
Inside Diameter 50mm | ||
Outside Diameter 75.5mm | ||
Seal Type Four-Lip Seal | ||
Thickness 12.5mm | ||
Seal Material TPE | ||
RoHS-status: Undantagen
- COO (Country of Origin):
- SE
SKF Double Lip Seal, Type L, Polyurethane Construction - TSN511L
Want to keep your bearing running smoothly with minimum hassle? Use this double-lip seal from SKF to keep contamination firmly locked out. As a Type L seal, it's suitable for use with plummer-block-housed units. For easy compatibility, it measures 255 (L) x 95mm (D) and has an overall height of 128mm, an inside diameter of 50mm and a centre height of 70mm. The 16mm holes for mounting are located 210mm apart (centre to centre), which makes it a precise fit for standard bearings.
Features & Benefits
• Additional dust lip makes it suitable for use in dirty and dusty environments
• Flexible, oil-resistant PU material is hardwearing to give you a long service life
• Suitable for use with shafts rotating at peripheral speeds of up to 13 m/s (2600 ft/min), supporting high-speed applications
• Flexible, oil-resistant PU material is hardwearing to give you a long service life
• Suitable for use with shafts rotating at peripheral speeds of up to 13 m/s (2600 ft/min), supporting high-speed applications
Applications
• Flour mills
• Materials handling
• Marine equipment
• Materials handling
• Marine equipment
What's a plummer block?
A plummer block is a pedestal-mounting block that houses a bearing. It holds the outer ring of the bearing still while allowing the inner ring to rotate. When properly installed they can last a long time without needing to be replaced.
Plummer Blocks, Bearing Lubrication and Accessories