Omron Speed/Standstill Monitoring Safety Relay, 24V dc
- RS-artikelnummer:
- 757-9332
- Tillv. art.nr:
- G9SX-SM032-RC
- Tillverkare / varumärke:
- Omron
Denna produkt har utgått
- RS-artikelnummer:
- 757-9332
- Tillv. art.nr:
- G9SX-SM032-RC
- Tillverkare / varumärke:
- Omron
Lagstiftning och ursprungsland
- COO (Country of Origin):
- CN
Produktdetaljer
G9SX-SM, Safety Relays, Standstill Monitoring
The G9SX-SM standstill monitoring relay with solid state outputs is based on Back EMF operation for two- and three phase systems.
Ready to use - covering all standard applications without additional setup
Easy integration in star- and delta wiring
Clear LED diagnosis of all inputs and outputs
Applicable up to Category 4 acc. EN 954-1
Easy integration in star- and delta wiring
Clear LED diagnosis of all inputs and outputs
Applicable up to Category 4 acc. EN 954-1
Standards
EN 954-1
G9SX-SM Sensor-less Safety Monitoring Module.
• Solid state outputs
• Operation for two and three phase systems.
• Easy integration in Star and Delta wiring.
• Clear LED status of all in and outputs.
• Standstill can be monitored even when there is no space to install a sensor.
• No sensor required. G9SX-SM detects back electromotive force (BEMF) generated when the motor rotates identifying when the motor is rotating or in standstill.
• Ready to use standard configuration. No sensitivity adjustment required. User configuration is also available for fine tuning (manual adjustment).
• Applicable to inverter controlled systems.
• Can be used with an inverter, no malfunction due to the inverters dynamic brake or auto-tuning functions.
• No difficult settings required.
• Covers all standard applications.
• Operation for two and three phase systems.
• Easy integration in Star and Delta wiring.
• Clear LED status of all in and outputs.
• Standstill can be monitored even when there is no space to install a sensor.
• No sensor required. G9SX-SM detects back electromotive force (BEMF) generated when the motor rotates identifying when the motor is rotating or in standstill.
• Ready to use standard configuration. No sensitivity adjustment required. User configuration is also available for fine tuning (manual adjustment).
• Applicable to inverter controlled systems.
• Can be used with an inverter, no malfunction due to the inverters dynamic brake or auto-tuning functions.
• No difficult settings required.
• Covers all standard applications.
G9SX-SM032-RC Safety sensor-less monitoring Standstill Machines Long Inertia.
• Safety standstill detection output 3
• Auxiliary output 2
• Rated voltage 24 V dc
• Spring Cage, terminal block type.
• Auxiliary output 2
• Rated voltage 24 V dc
• Spring Cage, terminal block type.
Features and Benefits.
• Rated supply voltage 24 V dc.
• Operating voltage range -15% to 10% of rated supply voltage.
• Power consumption 4 W max. (power consumption of loads not included).
• Rated input voltage standstill detection input (between Z1 and Z2 and between Z3 and Z4) 480 V ac max. (120 Hz max).
• Internal impedance standstill detection input approx. 660 KΩ.
• EDM input approx 2.8 KΩ
• Output safety standstill detection PNP, load current 0.3 A dc max.
• Auxiliary output (output monitor/error) PNP, load current 100 mA dc max.
• Over-voltage category (IEC/EN 60664-1_ III
• Response time 50 ms max.
• Detection voltage standard configuration 10 mV max. User configuration 100 mV max.
• Maximum cable length for stand-still detection inputs 100 m max.
• Vibration resistance frequency 10 to 55 to 10 Hz. 0.375 mm single amplitude, 0.75 mm double amplitude.
• Mechanical destruction shock resistance 300 m/s².
• Mechanical malfunction shock resistance 100 m/s².
• Weight 200 g
• PLe / Safety Category 4 (ISO13849-1)
• Operating voltage range -15% to 10% of rated supply voltage.
• Power consumption 4 W max. (power consumption of loads not included).
• Rated input voltage standstill detection input (between Z1 and Z2 and between Z3 and Z4) 480 V ac max. (120 Hz max).
• Internal impedance standstill detection input approx. 660 KΩ.
• EDM input approx 2.8 KΩ
• Output safety standstill detection PNP, load current 0.3 A dc max.
• Auxiliary output (output monitor/error) PNP, load current 100 mA dc max.
• Over-voltage category (IEC/EN 60664-1_ III
• Response time 50 ms max.
• Detection voltage standard configuration 10 mV max. User configuration 100 mV max.
• Maximum cable length for stand-still detection inputs 100 m max.
• Vibration resistance frequency 10 to 55 to 10 Hz. 0.375 mm single amplitude, 0.75 mm double amplitude.
• Mechanical destruction shock resistance 300 m/s².
• Mechanical malfunction shock resistance 100 m/s².
• Weight 200 g
• PLe / Safety Category 4 (ISO13849-1)
Specifikationer
Attribute | Value |
|---|---|
| Supply Voltage | 24V dc |
| Function | Speed/Standstill Monitoring |
| Terminal Type | Cage Clamp |
| Safety Category | 4 |
| Depth | 115mm |
| Width | 45.5mm |
| Series | G9SX-SM |
| Length | 100mm |