Allen Bradley Guardmaster Resistor

Se alla Safety Interlock Components

Antal (1 enhet)*

401,52 kr

(exkl. moms)

501,90 kr

(inkl. moms)

Add to Basket
välj eller skriv kvantitet
I lager
  • Dessutom levereras 35 enhet(er) från den 15 december 2025
  • Dessutom levereras 10 enhet(er) från den 15 december 2025
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter
Per enhet
1 +401,52 kr

*vägledande pris

RS-artikelnummer:
873-2174
Tillv. art.nr:
440F-A1308
Tillverkare / varumärke:
Allen Bradley Guardmaster
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla

Brand

Allen Bradley Guardmaster

Accessory Type

Resistor

COO (ursprungsland):
DE

Closing Caps, Connector & Cable and Terminators


The Safedge can be cut into a number of lengths to guard different points. Closing Caps, Cable Connectors and Terminators (resistors) can be used to seal the Safedge system.

Closing Caps


stock no. 249-6172 is used to close 0110N profiles
stock no. 249-6239 is used to close 1610N profiles

Connector & Cable


stock no. 249-7210 is 1m long

Terminators


stock no. 873-2174 is a 6k resistor (yellow) for series termination
stock no. 873-2178 is a 15k resistor (blue) for parallel termination

Allen Bradley Guardmaster Resistor For Safedge Profiles, 6kΩ Resistance, 2 Pin - 440F-A1308


Keep your safety devices working efficiently with this resistor from Rockwell Automation's Allen Bradley Guardmaster range. It supplies a resistance of 6kΩ to control the current running through your equipment, ensuring it sends reliable signals to your central controller. As the unit limits the current through an individual sensor, it lets you safely connect several sensors in series to support large systems. It terminates the connections from your safety devices to provide a cable-free way to complete your circuit.

• Restricting current flow keeps system power usage below 6W for energy efficiency
• Distinctive yellow housing for easy identification in busy setups
• Simple two-pin connector mates directly with a sensor for quick assembly
• Works with all sizes of profile sensor for versatility

Standards and Certifications


• UKCA
• CE
• UL

Does this resistor provide ingress protection for my safety device?


No, the resistor doesn't provide ingress protection by itself. If you need to secure your devices against contamination, you should use extra adhesive around the edges of your sensors when installing the resistor to ensure a strong seal.


Safety Edge

relaterade länkar