FAG 32005-X-XL Taper 25 mm ID Roller Bearing, 47 mm OD
- RS-artikelnummer:
- 190-8367
- Tillv. art.nr:
- 32005-X-XL
- Tillverkare / varumärke:
- FAG
Mängdrabatt möjlig
Antal (1 enhet)*
257,15 kr
(exkl. moms)
321,44 kr
(inkl. moms)
GRATIS leverans för online beställningar över 500,00 kr
Tillfälligt slut
- 41 enhet(er) levereras från den 21 april 2026
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter | Per enhet |
|---|---|
| 1 - 4 | 257,15 kr |
| 5 - 9 | 250,10 kr |
| 10 - 24 | 243,15 kr |
| 25 + | 236,77 kr |
*vägledande pris
- RS-artikelnummer:
- 190-8367
- Tillv. art.nr:
- 32005-X-XL
- Tillverkare / varumärke:
- FAG
Specifikationer
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla | Attribut | Värde |
|---|---|---|
| Brand | FAG | |
| Product Type | Roller Bearing | |
| Inside Diameter | 25 mm | |
| Bore Type | Tapered | |
| Cage Material | Sheet Steel | |
| Standards/Approvals | No | |
| Bearing Dynamic Load Rating | 31.5 KN | |
| End Type | Open | |
| Outside Diameter | 47 mm | |
| Static Load Rating | 34000N | |
| Number of Rows | 1 | |
| Cone Width | 15mm | |
| Bearing Type | Taper | |
| Välj alla | ||
|---|---|---|
Brand FAG | ||
Product Type Roller Bearing | ||
Inside Diameter 25 mm | ||
Bore Type Tapered | ||
Cage Material Sheet Steel | ||
Standards/Approvals No | ||
Bearing Dynamic Load Rating 31.5 KN | ||
End Type Open | ||
Outside Diameter 47 mm | ||
Static Load Rating 34000N | ||
Number of Rows 1 | ||
Cone Width 15mm | ||
Bearing Type Taper | ||
High radial loads occur
High axial loads act on one side
Combined loads must be supported (radial and axial forces acting simultaneously)
Precise axial guidance of the shaft is required (locating bearing function)
The bearing arrangement must have very high axial rigidity
The bearing position is operated clearance-free or under preload (single bearings are adjusted against each other)
High running accuracy is required
The load carrying capacity of angular contact ball bearings is no longer sufficient and the higher speed suitability of angular contact ball bearings is not required
The bearings are not required to compensate misalignments
The design objective comprises compact, rigid and economical bearing arrangements with a high load carrying capacity
relaterade länkar
- RS PRO 32005 Taper 25 mm ID Metric Roller Bearing, 47 mm OD
- FAG 32205-XL Taper 25 mm ID Roller Bearing, 52 mm OD
- FAG 30205-XL Taper 25 mm ID Tapered Roller Bearing, 52 mm OD
- NTN 4T-33005 Taper Roller 25 mm ID Taper Roller Bearing, 47 mm OD
- NTN 4T-32005X Taper Roller 25 mm ID Taper Roller Bearing, 47 mm OD
- FAG NU204-E-XL-TVP2 20 mm ID Roller Bearing, 47 mm OD
- FAG NUP204-E-XL-TVP2 20 mm ID Roller Bearing, 47 mm OD
- FAG 32303-A Taper 17 mm ID Roller Bearing, 47 mm OD