FAG 31311-A Taper 55 mm ID Roller Bearing, 120 mm OD
- RS-artikelnummer:
- 190-8366
- Tillv. art.nr:
- 31311-A
- Tillverkare / varumärke:
- FAG
Mängdrabatt möjlig
Antal (1 enhet)*
1 413,85 kr
(exkl. moms)
1 767,31 kr
(inkl. moms)
GRATIS leverans för online beställningar över 500,00 kr
Tillfälligt slut
- Leverans från den 06 februari 2026
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter | Per enhet |
|---|---|
| 1 - 4 | 1 413,85 kr |
| 5 - 9 | 1 374,13 kr |
| 10 - 24 | 1 337,39 kr |
| 25 + | 1 302,11 kr |
*vägledande pris
- RS-artikelnummer:
- 190-8366
- Tillv. art.nr:
- 31311-A
- Tillverkare / varumärke:
- FAG
Specifikationer
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla | Attribut | Värde |
|---|---|---|
| Brand | FAG | |
| Product Type | Roller Bearing | |
| Inside Diameter | 55 mm | |
| Bore Type | Tapered | |
| Cage Material | Steel | |
| Standards/Approvals | No | |
| Bearing Dynamic Load Rating | 123 KN | |
| End Type | Open | |
| Outside Diameter | 120 mm | |
| Static Load Rating | 139kN | |
| Cone Width | 31.5mm | |
| Bearing Type | Taper | |
| Välj alla | ||
|---|---|---|
Brand FAG | ||
Product Type Roller Bearing | ||
Inside Diameter 55 mm | ||
Bore Type Tapered | ||
Cage Material Steel | ||
Standards/Approvals No | ||
Bearing Dynamic Load Rating 123 KN | ||
End Type Open | ||
Outside Diameter 120 mm | ||
Static Load Rating 139kN | ||
Cone Width 31.5mm | ||
Bearing Type Taper | ||
High radial loads occur
High axial loads act on one side
Combined loads must be supported (radial and axial forces acting simultaneously)
Precise axial guidance of the shaft is required (locating bearing function)
The bearing arrangement must have very high axial rigidity
The bearing position is operated clearance-free or under preload (single bearings are adjusted against each other)
High running accuracy is required
The load carrying capacity of angular contact ball bearings is no longer sufficient and the higher speed suitability of angular contact ball bearings is not required
The bearings are not required to compensate misalignments
The design objective comprises compact, rigid and economical bearing arrangements with a high load carrying capacity
relaterade länkar
- SKF 31311 J2/Q Taper 55 mm ID Roller Bearing, 120 mm OD
- FAG 22311-E1-XL-K Taper 55 mm ID Roller Bearing, 120 mm OD
- FAG JK0S030 Taper Roller 30 mm ID Roller Bearing, 55 mm OD
- FAG 33111 Taper Roller 55 mm ID Tapered Roller Bearing, 95 mm OD
- FAG 32211-A Taper Roller 55 mm ID Roller Bearing, 110 mm OD
- NTN 4T-30311 Taper Roller 55 mm ID Taper Roller Bearing, 120 mm OD
- NTN 4T-30311D Taper Roller 55 mm ID Taper Roller Bearing, 120 mm OD
- FAG 33114 Taper Roller 70 mm ID Roller Bearing, 120 mm OD